|
[China]
Trade Verify
Address: 58 Longhe Road, Liushi Town,Wenzhou, Zhejiang, China 325604
Contact name:YANG
Mengchuan Instrument Co,Ltd. |
|
Verified Suppliers
|
|
|
Micro pressure manometer differential air pressure gauge Measuring range 0-30PA factory price
MC2000 differential pressure meter uses an extremely thin aluminum hollow seamless tube to effectively reduce the response time of the pressure indicator without hysteresis The MC2000 differential pressure meter uses an extremely thin aluminum hollow seamless tube to effectively reduce the response time of the pressure indicator without hysteresi. High strength plastic PC cover, visual transparent Angle is clear, Excellent strength, safety protection. The shell adopts all aluminum investment casting, high temperature metal drawing process, Internal magnetic transmission structure, eliminate the contact friction generated by the traditional gear mechanism, Effectively improve product shock resistance and service life. The product workmanship is fine, the gap is small, the product is more durable, the quality is guaranteed.
2000 series differential pressure gauge minimum range 0-30Pa, maximum range 0-30KPa. There are as many as 88 kinds of range and metric / imperial units to choose from. This differential pressure gauge using frictionless magnetic components, can rapidly measure the micro-pressure air or non-corrosive gases, including positive, negative (vacuum) or differential. No wear, hysteresis and clearance. Not filling, vaporization and freezing. This design has anti-vibration, anti-shake and high overpressure capability, you can guarantee access to high precision. The design impact, shock and overload protection.
| Product model | Model 2000 micro differential pressure meter |
| measured medium | Air or compatible non-corrosive gases |
| accuracy | ±2.5%FS |
| environment temperature | -7~60℃ |
| rated pressure | -68~100Kpa |
| process connection | 1/8' |
| shell material | Die cast aluminum or ABS plastic containing nylon |
| weight | 500g |
| standard equipment | 2 1/8 "NPT, head, 2 1/8" thread rubber hose connector and three embedded with screw mounting screw |
● Positive pressure measurement
With a hose with one of two high pressure hole pressure source connection and sealing of high pressure hole not connected, make one or two ventilation low pressure ventilation holes.
● Measuring the negative pressure
Low voltage source with the pipe connection with one of two low pressure hole and block not connected low-voltage hole, make one or two ventilation pressure ventilation holes.
● differential manometer
Hose the two higher high pressure sources to the two lower low pressure sources. And seal the unconnected outlet hole.
matters need attention
Pressure measurement: connect any two high pressure ports on the airway pressure source without blocking one or both low pressure ports through the atmosphere.
Measuring the differential
The high pressure source is connected with any one of the two high pressure mouth with the air pipe, and the low pressure pipe is connected with any one of the two low pressure mouth, and the pressure mouth is not used on the table.
Measuring the negative pressure
In the airway pressure source connected to an arbitrary two low pressure mouth, will not "plug to make one or two high pressure mouth through the atmosphere.
