Active Member
|
[China]
Address: 3rd Floor , No.1 , Shou zhi Road , Gou Jia Kaifa qu , ShangAn JingSha , Danzhao Town , NanHai District , Foshan City
Contact name:Merry
Foshan Dechang Technology Co., Ltd. |
|
|
Pneumatic angle nick grinder and Handheld Pneumatic nick grinder tools machine
The device is special designed for grinding "nick "with various
widths and depths in solid board/ corrugated board cutting die.
Nick Grinder Applications:
It should be installed and operated at a suitable working table or
die-cutting machine in workshop.
Instruction for operation:
1. When installing the grinding wheel ,put it between two
brass-sleeves on the transmission-shaft,then use spanner to fix the
transmission-shaft and screw the nut.
2. Different depth of nicks can be obtained by adjusting the
control screw:
Turning the screw clockwise will reduce the depth of
nick,contrary,the depth will increase.
3. The depth of nick should be determined by cutting-dies
,otherwise,will cause abnormal wear on the grinding wheel.
4. The switch on the tail of the device can control the speed of
motor,and it can control the mothor start or stop as well.
5. When grinding nicks,use locating-device to position the machine
on the top of cutting rules,then press the grinding wheel towards
the blade of cutting rules stably and quickly .
If you are interested in our Small Handle Plat Die Cutting Pneumatic Nick Grinder,please feel free to send us your inquiry.We will be very happy to serve with you!
SPECIFICATIONS FOR NICK GRINDER | |||
Application | For plat die cutting | ||
Function | The device is special designed for grinding "nick "with various
widths and depths in solid board/ corrugated board cutting die. | ||
Operation Way | Semi-automatic | ||
Driven Type | Pneumatic | ||
Speed | 35000RPM | ||
Air Pressure | 6.5kg | ||
Net Weight | 1.5kg | ||
1, The machine is used for cardboard, corrugated paper, color printing, knife mold line,to die cut various width,depth connection point. Precisely work in printing and die cutting industry, etc.
2, It replaces the traditional hammer tapping method, does not hurt the knife, no burrs, no deviation, convenient and fast, increases the service life of the knife die.
3, Four-corner V-shaped positioning, there will be no larger or smaller connection point.
4, The thickness of the grinding wheel can be replaced according to product requirements to achieve the perfect effect.
5, Simple operation, precisionly die cut connect point.
Product Picture Show :
