Shenzhen MS Auto Technology Limited |
4D CLONING TOOL
HOW TO MAKE A COPY OF A KEY with 4D CLONING TOOL PROGRAM?
If you plug 4D CLONING TOOL device in USB port first time operation
system offer to install the driver of located device.
Choose the manual installation method with point of driver
directory (it is 2nd method). Point the directory to folder "FTDI /
driver " from CD. If you have done everything correctly, then the
operation system will confirm that the new device already installed
and ready to work.
Detect the number of USB port in which you plug in the 4D CLONING
TOOL device. Click by right button on "My computer " icon. Choose
"System property -> equipment->devices manager ". Open "Ports
(COM and LPT) ".
The virtual COM port of device connection will located like "USB
Serial Port ".
The copy works for keys used on the vehicles indicated in the
specifications attached to this document, or accessible through the
INFO button in the 4D CLONING TOOL program.
Start the "4D CLONING TOOL PROGRAM " from the Menu:
Start Programs 4D Cloning TOOL Program of the "4D CLONING TOOL "
type of device in your possession which it is connected, then click
on that the program can detect the communication. If the version of
the not up to date, a special message update.
Make sure the device is on, connected to the PC by the serial port,
and the display shows "CONNECTED TO THE PC ".For the device to
operate properly, do not place it close to the PC monitor, PC,
power input point, or other electric equipment that generates
magnetic fields.
When the program has detected the device click on the "Start "
button on the same video screen:Every time the "Start" button is
pressed the settings selected will be saved on the disk.Follow the
instructions on the PC video, complete with illustrations and short
descriptions of the operations to be carried out at each step.
Notes:
1) Throughout the entire operation the device must be connected to
the PC in the "CONNECTED TO PC " mode.
2) Duration of the entire operation varies from some tens of
seconds to some minutes, according to the key to be copied and the
power of the computer used.