Active Member
|
[China]
Address: Building 19, National University Science Park, Zhengzhou, Henan, China
Contact name:Peter
Zhengzhou Kongsin Dental Equipment Co Ltd |
|
|
Dental Laboratory Gypsum Finisher Plaster Model Wet Trimmer Machine
Description :
1. Motor Support
2. Motor
3. Abrasive disc
4. Protective case
5. Tightening screws of the abrasive disc
6. Working platform
7. Adjusting screws of the working platform
8. Power switch
Instruction :
1. Unpack the package,check if all the accessories are inside.Read
this manual carefully before using
2. Fix the model trimmer to bench with one screw on each leg to
avoid shaking
3. The tighten the water pipe and the joint tightly to avoid
breaking off,which might cause water splashes and damage the motor
4. Tighten all the screws on the machine to avoid shaking
5. Turn on the power,notice if there any noise in the motor and
check if the abrasive disc,change the water pressure if the result
is not good
6. Input water
7. The trimmer can be adjusted which makes it easy and convenient
.The angles can be adjusted by more than 30 °, the trimmer angle
can be with 75 °-105 °
Specifications :
| Power supply voltage | < A > 220V / 50HZ ± 10% < B > 110V / 60HZ ± 10% |
| Power | 500W |
| Water pressure | 0.5 - 2kg |
| Rotation | 2800rpm |
| Weight | 20kg |
| Packing size | 44 x 35 x 35 cm |
