|
[China]
Trade Verify
Address: Building E, No. 12, South Sanlian Rd., Luwu, Changping, Dongguan, Guangdong, China
Contact name:David
Dongguan Orste Machinery Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
OGB Gravimetric Blender Mixer.pdf
OGB-xxx-xx
① ② ③
① Orste Gravimetric Blender
② Maximum Throughput (kg/hr) (4 Ingredients)
③ Quantity of Hoppers
All the materials are mixed after gravimetry for accurate control. The accuracy is ±0.1% when raw material ration is 0.5%~5% (excluding 5%), while the raw material ratio is bigger than 5%, the accuracy changes to ±0.3%.
Auto calibration after each material weighting ensures accuracy.
Up to 100 recipes can be stored for future use.
Alarm log function is standard.
For OGB-400 and models below, machine mount model is the standard supply (equipped with magnetic base, manual discharge plate).
For OGB-1000 and models above, floor stand is the standard supply (equipped with movable floor stand, storage hopper and pneumatic discharge valve).
Has the function of recycled material compensation (recycling hopper is standard equipped with low level switch). Aberration compensation can be automatically calculated based on the feeding amount of recycled materials.
All models are standard equipped with a second discharge valve to replace the main discharge valve when modular proportion is within 0.5%-5%.
Adopt Ethernet communication function to centrally monitor the operation connecting with molding machine.
Hopper low level sensor can be selected to give alarm when material is insufficient
Floor stand, pneumatic discharge valve, storage bin and suction box can be optionally purchased for floor mounting (Applicable for OGB-600 and models below)
OGB Gravimetric Blender is widely applicable in plastic processing field like plastic extrusion, injection molding, bottle blowing. Standard models can process granules like raw material, recycled material, masterbatch and additives. For color powder or color oil, special models can be customized.
When machine starts working, hopper 1 starts feeding on the basic calculation of set weight and unit time feeding of metering valve. The valve will be closed after feeding time and then gravimetric sensor will starts work. Within the error range, the machine will go to hopper 2, and then in succession hopper 3, until all the hoppers finish feeding. After feeding, materials will fall into the mixing tank and be blended until reaching the time limit. Manually open the shut-off plate or automatically open the pneumatic discharge valve to let the material fall into the injection molding machine or storage tank.
Model | Ingredients | Max. Batch (kg) | Compressed Air (kgf/cm2) | Mixing Motor Power (kw) | Max. Output (kg/hr) |
OGB-100 | 4 | 1 | 5.5 | 0.12 | 120 |
OGB-200 | 4 | 2 | 5.5 | 0.12 | 300 |
OGB-400 | 4 | 4 | 5.5 | 0.12 | 600 |
OGB-1000 | 4 | 20 | 5.5 | 0.4 | 1500 |
We reserve the right to change parameters without prior notice.
Notes:
(1) Above loading capacity is based on pellet material of 0.65kg/L in bulk density and 3-5mm in diameter.
(2) Power: 3ф, 230/400/460/575VAC, 50/60Hz.
ORSTE’s large scale Central Material Conveying System and cooling water circulation system including three major systems of centralized raw material drying, water temperature control and metering & mixing, are extensively applied in plastic injection molding industry.
The main products of the company are a series of high-tech products including Desiccant Honeycomb Dehumidifiers, Hopper Dryers, “Three-in-one” Compact Dryers, Auto / Semi-auto Weighing & Packing Machine (for plastic 25kg packages), Auto-loaders, Mold Temperature Controllers, Industrial Chillers, Mixers and Blenders, Masterbatch Dosers, Granulators, and Vibrating Screens.
