Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Standard model three-in-one feeder, thin plate precision stamping aluminum coil correction servo feeder integrated
Three-in-one feeder because the feeder is an automatic feeding device that integrates three kinds of machines: material rack, leveler and feeder. The control knobs and switches of all equipment are all concentrated in the console, so the staff does not need to go back and forth. You can control the overall situation and have the advantage of easy operation. The three-in-one feeder adopts high-tech and high-efficiency operation methods. Among all the punch equipment, the three-in-one punch feeder can be said to be an excellent performance modification. The feeder can be said to be an advanced automatic feeding device that is obvious to all in the industry.
RUIHUI feeder manufacturer to cater to the demand of the market, independent creative, developed different thickness optional triad feeder: the triad of sheet feeder (0.3 3.2 mm), medium plate triad feeder (0.5 4.5 mm), thick plate triad feeder (0.6 6 mm), high strength triad feeder (for yield strength strong material), customers can according to the different material thickness, material choosing suitable models
Mechanical properties:
1. High speed: the number of turns is proportional to the length of the feed, up to 600 times per minute.
2. Economy: No matter the width and thickness of the material, it is only necessary to adjust the feeder to match the mold, which is economical and practical.
3, energy saving: no electricity or air source, connected with the punch output shaft, driven by the punch, energy saving. Low failure rate and easy maintenance.
4. High precision: the feeding precision is ±0.05mm. If the guide tip is positioned, the precision can be ±0.01mm.
| Model | MAC3-400 | MAC3-600 | MAC3-800 | MAC3-1000 | |
| Stock Width(mm) | 50~400 | 50~600 | 70~800 | 70~1000 | |
| Stock Thickness(mm) | 0.3~4.5 | 0.3~4.5 | 0.3~4.5 | 0.3~4.5 | |
| Max.Coil Weight(kg) | 5000 | 5000 | 5000 | 7000 | 7000 |
| Max.Coil O.D.(mm) | Φ1400 | Φ1400 | Φ1400 | Φ1400 | |
| Coil I.D.(mm) | Φ508 | Φ508 | Φ508 | Φ508 | |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | |
| Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 | |
| Work Roll Number(piece) | up 4 / down 3 | up 4 / down 3 | up 4 / down 3 | up 4 / down 3 | |
| Feed Roll number(set) | 1 | 1 | 1 | 1 | |
| Main Motor | AC4.4 | AC4.4 | AC5.5 | C7.5 | |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | |
| Reel Motor(kw) | 2.2 | 2.2 | 2.2 | 3.7 | 3.7 |
| Power(v) | 3 Phase 220V/380V/50HZ | ||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | |
Straightening Performance:
| Model | MAC3-400 | MAC3-600 | MAC3-800 | MAC3-1000 | |
| Stock Thickness (mm) | 0.3~0.8 | 400 | 600 | 800 | 1000 |
| 1.0 | 750 | ||||
| 1.2 | 700 | 600 | |||
| 1.6 | 590 | 480 | 430 | ||
| 1.8 | 500 | 420 | 380 | ||
| 2.0 | 430 | 370 | 330 | ||
| 2.3 | 360 | 320 | 290 | ||
| 2.8 | 370 | 290 | 250 | 230 | |
| 3.2 | 300 | 250 | 220 | 200 | |
| 4.5 | 160 | 160 | 150 | 110 | |
*The avove flgures are the material having yield strength of 245N/mm2 max.
RUIHUI founded in 2000, the technology of automation periphery is from Japan.Now RUIHUI is a Japanese brand and the same technique of sheet metal stamping surrounding automation equipment manufacturer. RUIHUI has been learning Japan and Germany technology, and useing high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and reihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industy,and investment less.
FAQ:
Q1:What kinds of machines do you have?
Service:
