Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Feeder, roller feeder and CNC feeder are the three most commonly
used feeding equipments in the stamping industry. The width,
thickness and stamping process of the materials are different, but
their application range is the same. It is widely regarded by
customers as the most in the industry. Three kinds of feeding
equipment are commonly used.
It is the most suitable for high-speed punch feeder. Its maximum
feeding speed can reach 1200 times/min. The high-speed punching
machine has its own special feeding device, ie, the clip feeder.
Its high speed, stability and high precision are far less than
other types. Feeding equipment.
Special clamping feeder for high speed punching machine:
1. The feeding speed is fast and the performance is stable: the
main body of the clamp feeder is different in processing mode from
other feeders. The use of an integrally formed frame structure
fundamentally avoids the vibration of high speed stamping. At the
same time, the structural design of a spherical cam and three flat
cams maximizes the accuracy of high-speed feed.
2. energy-saving, quiet operation: the material feeder is driven by
the output shaft of the punch. It does not need to consume other
energy sources. Has good energy saving performance. The belt drive
device is used to drive the pinch device. It can run quietly
without any extra noise.
3. the adjustment is simple and intuitive, the debugging setting is
fast: the adjustment of the feed length of the clip feeder can be
adjusted only by adjusting the scale on the body, which is clear,
fast, intuitive and accurate.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
