GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
The high-speed punch presses the material to plastically deform it,
and the high-speed punch must match a set of molds (divided into
upper and lower molds). The high speed press places the material
between the two to achieve the desired shape and precision.
Therefore, the high speed press applies pressure to deform the
material, and the force applied during the machining produces a
reaction force. It is absorbed by the mechanical body of the high
speed punch.
The design principle of high-speed punching machine is to convert
circular motion into linear motion. Gears, crankshafts (or
eccentric gears) and connecting rods are driven by high-speed
punching clutches. The connecting rods and sliders of high-speed
punching machines need to have a connection point of circular
motion and linear motion.
The linear motion of the slider is realized, and the motion of the
main motor to the connecting rod of the high speed punching machine is a circular motion. The flywheel is driven by the main motor of
the high speed press. There are roughly two mechanisms in the
design, one is spherical and the other is cylindrical. Through this
mechanism, the circular motion is converted into a linear motion of
the slider.
The high-speed punch presses the material to plastically deform it.
Therefore, the high-speed punch must match a set of molds (divided
into upper and lower molds) to achieve the required shape and
precision.
The high-speed punch places the material between the two, and the
high-speed punch applies pressure to deform the material, and the
force applied during the machining produces a reaction force. It is
absorbed by the mechanical body of the high speed punch.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi