GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
Feeders are typically used to clamp steel plates to pneumatic
clamps that are connected by dovetail slots. The fixture is easy to
move, reducing material bending deformation and reducing dead zone.
The feeder adopts high-precision servo motor, precision ball screw
and high-performance linear rolling guide to meet the requirements
of stamping process.
Various requirements are especially suitable for product parts with
high processing precision, which overcomes the shortcomings of
large punch vibration, unstable precision and short service life.
In this era of rapid development, this automatic product is bound
to be favored by more and more manufacturers.
The feeder is mainly used for the transportation of granular
materials, powder materials and sheets, and the products are widely
used. In today's society, more and more industries of feeders will
be mechanized. The automatic feeder has high precision, environmental protection and time saving. This
also greatly reduces the labor intensity.
Really achieve low cost and high return. newspaper. The feeder is specifically designed to transport granular materials, powders
and flakes. The feeder has high precision, environmental protection
and time saving, which greatly reduces the labor intensity.
Industry insiders agree that more and more feeds will be used in
the workshops produced by enterprises.
Abstract Feeder conveyor is a new type of product based on market
demand, independent innovation and research and development. The
machine tool clamps the steel plate with a pneumatic clamp
connected by a dovetail groove. The fixture is easy to move, reduce
material bending deformation and reduce dead zone. High-precision
servo motor, precision ball screw and high-performance linear
rolling guide are used to meet the requirements of stamping
process.
It is especially suitable for product parts with high processing
precision, and overcomes the defects of large vibration, unstable
precision and short service life.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi