GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
Common reasons for the biasing condition of the feeder:
(1) Is the position of the material placed correctly?
(2) Is the position of the mold installation waiting?
(3) Whether the mold has a positioning pin to list out these
problems:
1. Help the customer to check whether these phenomena exist or not,
if there is help to solve these problems;
2. In the case of eliminating the above problems, the MAC feeder machine needs to be inspected when there is a biased material: Look at the
balance of the loose screw adjustment. When the material is biased
to the other side, twist the loose screw on the side until it is no
longer biased.
Different from the traditional punching machine, the anchor bolt
and the digging shock ditch are different. The installation of the
high-speed punching machine, the precision punching machine and the
anti-vibration are all realized by the anti-vibration foot. The
installation is quick and easy.
At the same time, it is convenient and quick to adjust the level of
the punching machine. When using the anti-vibration foot, it is
only necessary to select the appropriate size according to the
tonnage of the punching machine, and the punching position can be
adjusted at any time according to the processing technology
requirement, which is an ideal choice for modern processing.
The high-speed punching machine runs at a high speed, and the vibration is larger than that of the
precision punching machine. The high-speed punching air cushion
foot is composed of a plane, an air cushion body, a concave
portion, a retaining edge, a convex fast, a pressure ring, a gas
chamber and a gas valve, wherein the air cushion body and the bump
are resistant to use. The soft plastic material is formed into a
good support at one time.
After the high-speed punching air cushion foot is inflated, it is a
bump multi-point contact instead of the traditional anti-vibration
foot contact form, which ensures that the punching ground contact
is more firm and stable, and the high-speed punching air cushion
foot pressing ring makes the plane of the air cushion body and the
punch base close contact.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi