GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
Definition type: Punch feeder is also called automatic air feeder.
It is divided into various models. There are special floor-type
pneumatic feeders, left and right yaw shifting pneumatic feeders,
rodless pneumatic feeders, etc. Introduced to the main.
The main features of the punch feeder are as follows:
1. Pneumatic feeder is suitable for automatic processing of various large size materials
2. The use of electromagnetic cutting (electronic control variable)
with micro-switch control can make the feeding time early or
delayed. The movable tripod can be used to match the height of the
punching machine and the shearing machine.
3. Easy installation, safe operation, easy operation, low failure
rate and accurate feeding accuracy.
BNC Roller Feeder Features: Through CCS (Computer Control Servo
System), high-precision numerical control is realized in the past.
Quick and accurate operation can be done simply.
In daily use, the leveling machine must be regularly maintained and
maintained. Many customers are often neglected or do not know how
to maintain and maintain the leveling machine, causing the leveling
machine to be unable to work properly or leveling the material
after stains and damage.
Some factories may have large dust or raw materials that are not
clean. The leveling roller of the leveling machine is dirty, and the material is contaminated or scratched when the
material is leveled, resulting in unqualified products.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi