Automatic Lathe Nc Servo Roll Feeder Stamping Peripheral Equipment

When the mechanical equipment needs to be equipped with certain safety facilities, the feeder must have several facilities:
1. The punch feeder should have signs such as nameplates, operating instructions and safety and warning instructions.
2. Whether the power supply wiring of the punch feeder is standardized, and the cable of the equipment cannot be damaged or aged.
3. The key brought by the power distribution box door lock on the punch feeder is to automatically cut off the power when opening the door, so as to avoid the situation that the door is still energized.
4. When the punch feeder is to perform the conversion of single, continuous, pedal stamping, etc., it should be carried out with a transfer switch with a key lock.
5. When the punch feeder is operated in a single stroke, the continuous stamping stroke shall not occur.
6. In the operation of selecting continuous stroke, the pre-control action should be provided during the operation.
7. the punch feeder must have an emergency stop button, and can automatically lock.
8. The pedal operation and hand operation of the punch feeder should have interlocking control.

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi