Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
The left and right offset feeder is mainly for the die-rolling of
the wafer, and the professional wafer cutting production line is
formed by automatically shifting the metal wafer to feed.
For example, the equipment is used for rounding and misalignment.
The left one is rounded and the right one is rounded. The machine
has a buffering process during the back and forth yaw.
The most important feature of the left and right offset feeder is
to save materials and improve utilization rate, which is suitable
for the production of wafer stamping and blanking.
The left and right offset feeder is a new type of machine developed on the basis of the traditional
nc feeder. Its principle is to minimize the trim of the punched
disc by means of left and right offset shift, and the offset feeder
is also called partial bias. The pendulum feeder, the swing feeder,
although the different methods are the same equipment.
The offset feeder is different from other nc feeders in terms of
stamping materials. For example, the roller feeder has high feeding
precision, and is more suitable for punching long or square
materials. The number of feedings is more in one minute, but the
disadvantage is that one punch corresponds to One roller feeder, if
you change another punch, you need to re-adjust the rocker arm and
the eccentric disk.
Another example is the advantage of the ncf CNC feeder, which is used for punching long-sized materials. It is also very
convenient to adjust the press.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
