GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
The NC servo feeder is replaced by a multi-station stamping
production mode consisting of a multi-station punching machine. The
multi-station stamping production line can install multiple sets of
molds on one punching machine, which can realize the single
stamping process and complete the multi-step stamping processing
production. The positioning is accurate, the product quality is
good, and the fully automated stamping production with high
efficiency, high precision, high quality, energy saving and
material saving is realized.
When the multi-station stamping production line is used, the coil
material is unrolled and discharged through the material rack, and
the leveling machine is leveled and then sent to the punching mold
through the NC servo feeder. The material rack is controlled by the induction frame between
the leveling machine and the feeder. The automatic feeding of the
coil material, the size of each feeding is automatically controlled
by the NC servo feeder.
The robot sucks the workpiece through the suction cup, the punch
slider rises, and the robot starts working. When the robot arm
moves the workpiece into the third mold and gives a signal, the
punch slider descends and completes the third step of the edge
forming.
When the last arm of the robot draws the workpiece from the station
to the conveyor belt position, the entire complete stamping cycle
of the workpiece ends, and the fully automated stamping production
is realized simply and quickly. Only one type of mold can be
punched at a time, and the feeder is equipped with a multi-station
punch to realize multi-step stamping.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi