Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Leveling Feeder, Guangzhou Plate Automated Stamping Feeding Equipment
The flat electronic feeder realizes the discharging function through the flat loading tray, which is not limited by the inner diameter of the winding. At the same time, the multi-roll stacking can greatly save the feeding time, and its biggest advantage is that the unwinding speed is fast, the most Up to 30m/min.
At the same time, according to the speed of the subsequent leveling machine or feeder, the discharge speed can be automatically adjusted, and the function of synchronous operation with the subsequent machine can be automatically realized, and no manual shutdown adjustment is needed, which is far from unmatched by other material racks.
Ruihui plane electronic feeder has a swinging rod that can swing up and down. The lower end of the swinging rod is connected with a supporting wheel. The other end of the swinging rod is connected with a potentiometer. The output of the potentiometer is connected to the output end of the electronic IC board. The electronic IC board The output is connected to the motor inverter controller.
As the swinging speed of the flat electronic feeder changes with the unwinding speed, the drooping amplitude will become larger and smaller, and the loading wheel will move up and down. When the speed of the current leveling machine or feeder is fast, the amplitude of the pendulum will sag. It becomes smaller and the pallet wheel rises.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
