Leveling Coil Feeder Machine Auto Stamping Parts Precision Stamping Processing

Leveling feeder, auto stamping parts, Guangdong Ruihui precision stamping processing

The molds used in the field of precision stamping are equipped with guide pins to correct the length of the material fed into the mold each time to ensure the precision of the stamping process.

If this correction is to be realized, the feeder must be equipped with a relaxation device to achieve the matching. After the tip of the mold guide pin enters the stamping material, the feeder clamp is in a relaxed state, and the guide pin can correct the error in time. And this relaxation time is the angle of relaxation of the feeder.

In fact, the reason for this problem is very simple, that is, the stamping process of each set of molds is different, so the thickness of the mold, the length of the guide pin is different, and the change of the length of the guide pin will make the time for inserting the guide pin into the material.

This time has changed. If the time of relaxing the angle is still not properly realized by the previous one, the guiding function of the guiding pin can not be realized, which ultimately leads to the inaccuracy of the feeding length.

Therefore, the adjustment of the feeding angle of the feeder after the mold is changed is an indispensable part. The adjustment standard is to relax when the guiding pin of the mold enters the hole of the material.

When the mold is raised, the positioner needle is the basic criterion for the material to be clamped in front of the needle hole of the material, so as to ensure the high precision of the punch press production.

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi