GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
Flat electronic feeder, metal stamping parts, Ruihui automatic feeding equipment
The use of coil materials in stamping production can reduce production costs, facilitate transportation, reduce space occupation and advance the production of automated processing. Therefore, the use of coil materials in modern stamping processing has become the consensus of the industry.
If the coil material is to be used in punch press processing, it needs special equipment to discharge and unwind it. The equipment stamping industry that realizes this function calls it a material rack; the material rack is an essential component of the stamping production line equipment. , which usually differs depending on how the material is placed.
Performance characteristics of the flat electronic feeder: The flat electronic feeder is the only horizontal feeder. It adopts the plane loading tray discharging method, which is not limited by the inner diameter of the coil. The tracker and pendulum provide automatic control of the control signal. Quick unwinding.
The unwinding speed is fast and stable, and it has the advantages of simple loading (multiple rolls can be stacked at the same time), fast unwinding speed (up to 30m/min), and easy operation.
As long as it is used in conjunction with high-speed punching machines for high-speed sheet metal stamping processing. Pay special attention to the fact that the flat electronic feeder has strict limits on the width and thickness of the applicable materials due to the horizontal discharge method.
The maximum applicable material thickness is 1.0mm, and the maximum applicable material width is 120mm. If it exceeds this range, the vertical material frame is required. If it exceeds this range, the material will be too wide and the weight will be dragged when the pendulum is drooped. Excessive force will affect the normal operation of unloading and unwinding.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi