Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Automotive processing 3-in-1 servo feeder, metal uncoiler, Ruihui stamping feed line
The feeder is an indispensable equipment for automatic continuous production with a punching machine. It can reduce the production cost of stamping processing, improve the processing efficiency and improve the quality of stamped products. Therefore, it has been widely used in the stamping industry.
1. Air Feeder: This is the lowest-priced feeder equipment in the stamping industry. It uses cylinder clamps to complete the feeding action. It is easy to install and allows customers to automate with minimal investment.
2. roller feeder: no need to use additional power, gas source, the output shaft of the punching machine to provide feed power, feed speed and punch synchronization performance is good, is currently the most popular and cost-effective feeder equipment.
3. NC servo feeder: It is the first feeder model to introduce the CNC system. The servo motor drives the feeding roller to complete the feeding action. The time of relaxation and feeding is provided by the cam signal of the punching machine to achieve complete synchronization with the punching machine. Feeding accuracy Up to ±0.02mm.
It is the only feeder type in the three models that can be used for long step, multi-step, and thick plate material feeding. It has the widest range of applications and the easiest operation (just set the length and step on the touch screen). The number of times can be the highest degree of customization (can be customized thick plate, double tape, yaw type).
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
