Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Heavy material rack, sheet metal discharging, Ruihui automation equipment
The heavy-duty material frame is a special equipment for discharging and unwinding metal sheets. It can be combined with a variety of automation equipment to form unwinding, leveling, stamping production lines, sheet shearing production lines and other sheet product production lines.
Heavy-duty material racks are widely used by stamping customers due to their large load capacity, simple operation, high degree of automation, and low failure rate. However, the standard heavy-duty material rack has an obvious drawback: it needs to manually shake the handle to expand the coil. Labor intensity is great.
Especially when the material is thick and the material is heavy, the artificial material often cannot completely expand the material, and the material is detached when the material is fed by the unwinding, which is easy to cause a safety accident. When the material is thick, there is a lack of the pressing device, and the coil material will be seriously scattered. The material phenomenon affects the overall stamping production efficiency.
The hydraulic heavy-duty material frame is a highly efficient and practical material frame specially developed and produced by Ruihui Machinery for heavy-duty thick plate coil discharging and unwinding.
The hydraulic heavy-duty material frame is equipped with a hydraulic pressure expansion and contraction device at the end of the main drive shaft of the material frame, which is composed of a hydraulic cylinder, a piston rod, a shrinking and retaining plate, a sliding sleeve after expansion and contraction, a pre-shrinking and sliding, and a shrinking frame. The board and the support tile are composed.
It is an upgraded and improved version of the traditional heavy-duty material frame. It converts the hand-rolling expansion and contraction structure into a hydraulic station-type oil pressure expansion and contraction method, and installs a pressing device on the material frame frame to perform real-time on the coil material. By the above-mentioned improvement, the expansion of the coil material and the stable and efficient unwinding can be quickly achieved.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
