High Speed Punching Machine , Roller Feeder Hardware Fittings Stamping Processing

High-speed punching machine, roller feeder, hardware fittings stamping processing

Stamping production is developing in the direction of high speed and high precision. There are more and more occasions for high-speed punching in stamping production. The maximum stroke of high-speed punching machine can reach 1200 times/min.

At this time, if the traditional air feeder, roller feeder, and NC feeder are used for feeding, the high-speed punching performance is not fully utilized, and the clip feeder is an efficient feeding device developed for high-speed stamping production.

It adopts mechanical stamping and feeding linkage structure, and can feed up to 1200 times per minute, which fully realizes the purpose of synchronous feeding by punching.

When the upper die of the punch presses into the material, the cycloid cam of the feeder is at the starting point of the equal diameter. At this time, the cam rotates and the material does not move, and the punch presses the material until the cam rotates through the end of the equal diameter, and the cam continues to rotate. Push the slider along the slider.

When the chuck is disengaged from the material and the cam continues to rotate through 180 degrees, the material is caught in the chuck of the next station. At this time, the upper mold is withdrawn, the cam continues to rotate, and then the clamping rod is moved, and the clamping rod pushes the material toward The next station movement.

When the material moves to the next station, the punching die is pressed again to complete a working cycle, and the high-speed automatic feeding of the stamped material is realized.

Products:

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi