Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Automatic Flat Electronic Decoiler Straightener Feeder Metal Strip Material Stamping
Automatic feeding equipment, metal strip material stamping, flat electronic feeder
The flat electronic feeder is a new type of discharging device specially developed for the high-speed stamping of thin-plate materials. The horizontal flat-plate feeding method is not limited by the inner diameter of the coil.
The multi-roll thin sheet coil can be stacked at the same time, which fundamentally ensures the continuity of stamping production, the speed control mode of the inverter can be adjusted arbitrarily, the discharging speed is fast and stable, and the operation is simple, which is the most efficient discharging of thin plate high-speed stamping. , unwinding equipment.
The planar electronic feeder is composed of a chassis, a bracket, an electric control panel, a tracker, a swinging bar and a flat disk. The bracket and the chassis are connected to form an overall frame structure, and the electronic control panel and the tracker are disposed on the bracket.
At the same time, a motor is arranged in the chassis, and the flat disk covers the chassis. The bracket is also connected with an L-shaped pull rod and a swing rod with an eccentric wheel, and the pull rod is arranged at the bottom of the electric control panel and fixed to the bracket.
The eccentric wheel is a closed square ring. The metal belt enters the punching machine after passing through the eccentric wheel to prevent the metal belt from falling off. Before the metal belt enters the eccentric wheel, it is hung on the pulling rod, and the function is to provoke the metal belt to make the conveying smoother. .
The motor is controlled by an electric control panel, and its rotation speed is set to be consistent with the punching speed of the punching machine. The metal strip material is placed on the flat plate, and the metal belt is continuously conveyed forward as the motor drives the rotation of the flat disk.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
