Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Automated stamping, metal coil die processing, material air feeder
Between the 0. 1-0. 5mm. Between the 0. 1-0. 5mm. Between the 0. 1-0. 5mm.
In addition, relying on manual feeding for positioning, not only the accuracy is affected by human factors, but also the production efficiency is very low, the scrap rate is high, therefore, this method is not suitable for mass production, so there is an urgent need for an efficient and practical feeding device to achieve continuous stamping. The purpose of production.
The air feeder is the earliest and most economical feeding equipment in the stamping industry. It can realize automatic stamping production with minimal investment.
The air-feeding machine-based stamping production line is usually from left to right by a heavy-duty material rack that unwinds the unwinding, a leveling machine that flattens out the material that is unrolled, an air feeder that is automatically fed with a punching machine, and an air feeder that is automatically fed. A precision die consisting of a continuous die.
In actual use, a roll of metal coil of a certain width is placed on the heavy-duty material rack, and the handle is rotated and rotated to realize tension and relaxation. Its main function is to discharge and unwind the coil.
The leveler leveles the web by a leveling roller on which the misalignment is arranged. The feeding accuracy of the air feeder can reach 0. 01mm, and the step of feeding can be adjusted. It uses compressed air to clamp and move the coil and can control the moving step through the solenoid valve.
It is connected by a solenoid valve and a slider of the punching machine. When the slider is at the top dead center, the automatic air feeder clamps the coil material to the first position in the continuous mold, and then the punch presses the stamp, and the slider returns again. At the top dead center, the feeder clamps the coil material into the continuous mold and feeds it to the second position, thereby achieving fully automated stamping production.
Products:
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
