GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
Coil flattening and stamping, high speed precision leveling machine
The punching automation production line has gradually replaced the
traditional manual feeding method because of its high degree of
automation, good safety performance and high quality of stamping
finished products.
The punching material needs to be a flat plate. The coil material
needs to be leveled by the leveling machine to eliminate the
internal stress before it can be used. After the leveling, the
plate is fed into the punching machine through the feeding machine
for stamping processing.
There are many types of commonly used leveling machines such as
ultra-precision leveling machines, precision sheet leveling
machines, precision leveling machines, thick plate leveling
machines, etc., but these common leveling machines are not fast
(usually 16m/min). A long waiting area is required.
If it is used in combination with high-speed punching EI sheet,
motor stator and rotor, silicon steel sheet, etc., it is very
inconvenient, and lacks the synchronization performance matched
with the working frequency of the punching machine, and the stability is poor, which is easy to cause discontinuity
in production.
According to the customer's demand, Ruihui Machinery has developed
an S-type high-speed precision leveling machine with a speed of up
to 60m/min. At the same time, it adopts the S-type guiding system,
and the material is leveled by the leveling device. The system is
fed into a subsequent feeder (usually a gear feeder).
During the period, the photoelectric switch detects the
insufficient discharge of the leveling material or excessive
discharge, which greatly saves the waiting space, and cooperates
with the frequency converter to adjust the leveling speed to
achieve complete synchronization with the punching machine.
Products:
Specifications:
Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F |
Stock Width(mm) | 70~600 | 70~800 | 70~1000 | 70~1300 |
Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 10000 |
Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 |
Coil I.D.(mm) | 508 | 508 | 508 | 508 |
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 |
Work Roll Number(piece) | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 |
Feed Roll number(set) | 1 | 1 | 1 | 1 |
Main Motor | AC7.5 | AC11.0 | AC11.0 | AC11.0 |
Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 7.5 |
Power(v) | 3 Phase 220V/380V/50HZ | |||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance:
Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F | |
Stock Thickness (mm) | 0.8~2.3 | 600 | 800 | 1000 | 1300 |
2.8 | 933 | 933 | |||
3.2 | 714 | 714 | 714 | ||
4.0 | 457 | 457 | 457 | 457 | |
4.5 | 361 | 361 | 361 | 361 | |
5.0 | 293 | 293 | 293 | 293 | |
6.0 | 203 | 203 | 203 | 203 |