Roll Processing High Precision Leveling Machine , Stamping Automatic Feeder

Roll processing, precision leveling machine, stamping automatic feeder

With the rapid development of stamping processing, the thickness and strength of the customer's coil material has been greatly improved, and many customers have a thickness of more than 3.0 mm.

At this time, the use of precision leveling machines and half-type leveling machines that are common in the market can not achieve the actual effect. The thick plate leveling machine is a new type of leveling machine developed to solve the difficulty of flattening the thick plate materials of customers.

Thick plate leveling machine operation method:

1. First open the feed flattening cylinder so that the feed flattening roller is in the raised position, and then open the feed compacting cylinder to the relaxed position. The worm gear fine adjustment device is adjusted so that the upper and lower rollers are slightly apart from each other by a certain distance.

2. Put the material material head into the feeding flattening roller and press the flattening cylinder. After the material is bent and straightened, the flattening cylinder is opened to feed the material forward to the feeding roller, and the pressing gas is pressed to make the material.

The roller presses the material, and at this time, the electric control box changeover switch is switched to the manual position, and the material is slowly fed according to the inching button.

Products:

Specification:
 

Straigtening performance:
 

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi