Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Air feeder punching and feeding equipment, automatic stamping feeding precision, punching processing
Air feeder principle and advantages and disadvantages
The air feeder is the earliest feeding device used in the stamping
industry. Its principle is to use the air source as the power.
The material is clamped by the cylinder and fed by the telescopic
stroke of the cylinder. The adjustment of the feed length is
controlled by the length of the stroke of the cylinder.
Air feeder advantages: easy to operate, easy to install, affordable, and can
achieve automatic stamping feeding equipment at the lowest price.
In actual production, it is mainly used for feeding of stamping
products with low precision and fast speed.
Disadvantages of air feeder: easy to damage materials, O-ring wear
has an impact on the feeding accuracy.
The length of the air feeder needs to be fed. Firstly, loosen the
fixed fine adjustment screw under the stopper of the feeder. Remove
the length fine adjustment screw, then load or unload the air
feeder to open the spacer to increase or decrease the feed ruler.
If you need to connect to any size, you must adjust the fine
adjustment screw of the feed length, but when the fine adjustment
screw rotates clockwise: the air feeder feed length is shorter.
If the fine adjustment screw rotates counterclockwise, the air
feeder feed length is longer, but the fine adjustment screw rotates
counterclockwise to make the feed length longer, but the fine
adjustment screw rotates one turn and its feed distance is 1mm.
The feed length fine adjustment screw must be removed before
removing the air feeder spacer ring. The more the spacer ring is
removed, the longer the feed length.
Specifications:
| Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F |
| Stock Width(mm) | 70~600 | 70~800 | 70~1000 | 70~1300 |
| Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
| Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 10000 |
| Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 |
| Coil I.D.(mm) | 508 | 508 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 |
| Work Roll Number(piece) | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 |
| Feed Roll number(set) | 1 | 1 | 1 | 1 |
| Main Motor | AC7.5 | AC11.0 | AC11.0 | AC11.0 |
| Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
| Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 7.5 |
| Power(v) | 3 Phase 220V/380V/50HZ | |||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance:
| Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F | |
| Stock Thickness (mm) | 0.8~2.3 | 600 | 800 | 1000 | 1300 |
| 2.8 | 933 | 933 | |||
| 3.2 | 714 | 714 | 714 | ||
| 4.0 | 457 | 457 | 457 | 457 | |
| 4.5 | 361 | 361 | 361 | 361 | |
| 5.0 | 293 | 293 | 293 | 293 | |
| 6.0 | 203 | 203 | 203 | 203 | |
Products:
1. Pre-Sales Service:We have professional designers to meet the
different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all
day service.
3. Full-Service:Actively cooperate with customers to deal with
problems in equipment using.
4. Engineers can provide service machinery overseas.
