8mm 2.3V / 3.0V Metal Gear-box motor DC Gear Motor Low Noise and
Large Torque High precision gear
- DC Worm Gear-Box Motor
- Diameter : Φ8.0mm
- Output : APPROX 0.1~1.0W
- Noise Level : Less than 50dB
- Low noise, stable performance, quality assurance
Typical Applications
Specifications
The following specifications are only representative of one of our
models. Other performance parameters can be customized according to
customer requirements
MODEL | VOLTAGE | NO LOAD | AT MAXIMUM EFFICIENCY | STALL |
OPERATING RANGE | NOMINAL | SPEED | CURRENT | SPEED | CURRENT | TORQUE | OUTPUT | TORQUE | CURRENT |
r/min | A | r/min | A | mN.m | g.cm | w | mN.m | g.cm | A |
GM8F-K10VA-05215-100 | 1.5-5.0 | 3.0V | 210 | 0.070 | 138 | 0.120 | 5.29 | 54 | 0.360 | 14.7 | 150 | 0.25 |
GM8F-K10VA-05215-20 | 1.5-5.0 | 3.0V | 1050 | 0.070 | 690 | 0.120 | 1.06 | 10.8 | 0.360 | 3.35 | 34.2 | 0.25 |
GM8F-K10VA-06170-100 | 1.5-4.5 | 2.3V | 200 | 0.800 | 110 | 0.170 | 8.82 | 90 | 0.391 | 19.6 | 200 | 0.30 |
GM8F-K10VA-06170-20 | 1.5-4.5 | 2.3V | 1000 | 0.800 | 550 | 0.170 | 1.8 | 18 | 0.391 | 3.9 | 40 | 0.30 |
Drawing
![](http://img.everychina.com/nimg/93/0a/f6e529e6c5198f54bea48ebee6a6.jpg)
Product Details Show
![](http://img.everychina.com/nimg/53/cd/95bfe347f4f0def3ac5b7779cd96.jpg)
For more information, please contact us directly or through our
sales and representative offices.
Competitive Advantage
- 16 years experience in manufacturing motor and gearbox motor
- Experienced Staff: average 12 years experience in R&D , ODM
& OEM
- International Approvals: ROHS/ISO9001/ISO14001/SGS/TS16949
- Competitive Price
- High Product Performance: Low noise, High efficiency, Long lifespan
- Prompt Delivery: 20-25 working days after payment
- Quality Approvals
- Small Orders Accepted
- Advanced equipments: Automatic winding machine, stator automatic setting machine, end
cover automatic setting machine, automatic soldering machine, etc
Quality Cotrol Test
- Reliability Test & Laboratory
- Noise Test
- Water-proof Test
- Life Test
- Impact Test
- Storage Test
- Salt Spray Test
- Environmental Related Substance
General Instructions for Use of Woshine Precise Machinery Motors
DO’S and DON’TS to keep your motors in order
- If silicon materials, which contain low molecular silicon compound
adhere to the motor’s commentator, brush of other parts, then upon
rectification of the electric energy the silicon breaks down into
SiO2,SiC and other constituents which produce a rapid increase in
the contact resistance between the commutator and brush. therefore
great care should be taken when silicon material is used in a unit
and check well at the same time that such binding agents or sealing
materials are not generating gases of detrimental nature, whether
used for motor mounting or applied during your product assembles.
care must be taken for an optimum selection, especiallywhen using
those of cyanic adhesive and sulfur gas.
- When mounting your motors by means of binding agents, DON’T flow
any adhessice to the Bearings nor intrusion into the motors.
- Axial thrust on the output shaft could have an adverse effect on
the motor life i.e... as is produced by worm gears, fans etc, check
the service life expected under the actual operating conditions by
testing the motors installed in your application products .for
heavy thrust loads consider using something mechanical to retain
the shaft end.