|
[China]
Trade Verify
Address: 4/F, Building 33, ChenTian Industrial Zone, BaoMin Road 2, XiXiang Street, Bao'an District, Shenzhen
Contact name:Maria
Shenzhen iStarVideo Technology Co., Limited |
|
Verified Suppliers
|
|
|
Feature: (Vehicle GPS Tracker)
* GSM 850/900/1800/1900MHz
* GPS Module ZKM AT6558D
* Support Temperature Sensor, Door Sensor, SOS, MIC
* Support TCP and UDP
* Support Standard Protocol
* Support History Tracking Report, Alarm Report and so on
* Geo-Fencing Alarm, Overspeed Alarm
* Low Battery Alert
* Immobilization Function
* SOS Alarm
* Voltage: 9-80V DC
Functions: (Vehicle GPS Tracker)
Remote Audio Monitoring , Remote Power/Fuel OFF , SOS Alarm , ACC Engion Detection , Power OFF Alarm , Overspeed Alarm , Vibration Alarm , Move Alarm , ACC Illegal Engion Alarm , etc.
Specification: (Vehicle GPS Tracker)
| Model | iSV-GTX02 |
| GSM Module | MT6261D |
| Communication Band | 2G: GSM 850 / 900 / 1800 / 1900 MHz |
| GPRS | Class12, TCP/ IP Build in GSM Module |
| GPS Chipset | ZKM AT6558D |
| Location Mode | GPS+BDS+LBS 3Modes |
| GPS / GSM Antenna | Built-in |
| GPS Channels | 64~66 |
| GPS Sensitivity (Tracking) | -165dBm |
| Acquisition Sensitivity (Tracking) | -148dBm |
| GPS Starting Time | Hot start: < 2 Sec (Open Sky) |
| Cold start: < 30 Sec (Open Sky) | |
| GPS Position Accuracy | <10 Meters |
| GPS Velocity Accuracy | 0.1 m/s |
| Voice Monitoring Range | 5 Meters |
| Backup Battery | 180mAh / 3.7V |
| Data Transmit | TCP, SMS |
| Over Speed Alarm | Support |
| Low Power Alarm | Support |
| Movement Detection | Support |
| Kilometer Report | Support |
| ACC Detection Function | Support |
| Oil Cut OFF | Support |
| Vibration Alarm | Support |
| History Playback | Support 1 Months |
| LED Indicators | 2 LED Indicator: GPS-blue / GSM-red |
| Input Voltage | 9-80V DC |
| Operating Temperature | -20°C - 70°C |
| Operating Humidity | 5% - 95% Non-condensing |
| Weight | 59g |
| Dimension(L*W*H) | 98 * 53 * 13mm |
Install the terminal: (Vehicle GPS Tracker)
Suggest to install the terminal concealed by the dealer designated professional body.
Please make sure to install the terminal with this side towards the ground.
Notice
# Keep the terminal away from RF emission sources such as backing radar,car burglar alarm and other vehicle mounted communication devices.
# Suggest to use wide strong double-sided adhesive sponge to fix it, or use cable ties and other liable methods to fix it.
# Make sure the face upward as the terminal has internal GPS and GSM antenna and without metal blocks. Suggest to install the terminal in the following places:
1) The hiding place below the front windshield trim panel
2) The hiding place around the front dash
3) The place under the rear windshield
Notice: The GSM and GPS signal may be weakened if there is metal thermal insulation layer or heating layer on the front windshield, the terminal may work abnormally, so please change the place to install the terminal.
