Changzhou Dali Plastics Machinery Co., Ltd |
|
The multi-layer pipe production line is very popular now, take the 3-layer pipe production line for example, the inner and outer layers use new raw material, and the middle layer uses recycled plastic(+ fiber glass material), this design highly increases the strength and tensile of pipes, at the same time lower the production cost.
This production line fully absorbs and combines with
the laminating compound, and optimizes the design of products such
as floor mats, foot pads, roof cloths, and carpets, with stable
quality and powerful functions.Surface of lamination can be
textured according to customers’ requirement.
The final products can be used in a variety of car interior,
household and so on.
Material | PE,EVA,TPR,PP,and other granule |
Working width | 1100--2500mm max |
Thickness range | 0.015mm to 0.1mm |
Screw Dia. and L/D | Φ90---120×35:1 X1 |
T die width | 1400---2800mm |
Roller surface length | 1400--2800mm |
Winding Diameter | Φ500 |
Power supply | Three Phase 480V( ±10% )60hz, Single Phase 120V 60Hz 3P,480V( ±10% ) 60Hz, Single phase, 120V 60Hz |
Mechanical speed: | 30-100m/min |
Extrusion capacity(Maximum) | 80~180kg/h(varies with material) |
Installation power | About 90--180kw ( actual consumption is 40%-50% of total installation power) |
Installation space | L=12M; W=4.5m; H=3.5m
|
Unwinding ⇒Extrusion ⇒Laminating⇒Trimming⇒Pulling⇒Slitting or Rolling
Scene of assmebly workshop