Active Member
|
[China]
Address: NO.2169 FANGHE ROAD SHANGHAI CHINA
Contact name:JACKY
C Y Q International Trading Co.,Limited |
|
|
Second Hand Hydraulic Excavator Hitachi EX200-5 Crawler Excavator
Original made in JAPAN
Working hours: 9000
Machine weight: 18800 kg
New colour,all parts reconditioned
This mahine can fit bucket with capcity 0.7--1.0 cbm, can install with breaker as well.
More specification
| Engine | ||
| Make | Isuzu | |
| Model | 6BD1 | |
| Net Power | 132 hp | 98.4 kw |
| Power Measured @ | 1950 rpm | |
| Displacement | 396 cu in | 6.5 L |
| Torque Measured @ | 1600 rpm | |
| Max Torque | 340 lb ft | 461 Nm |
| Aspiration | Turbocharged | |
| Number of Cylinders | 6 | |
| Operational | ||
| Operating Weight | 41500 lb | 18800 kg |
| Fuel Capacity | 81.9 gal | 310 L |
| Cooling System Fluid Capacity | 6.1 gal | 23 L |
| Hydrauilc System Fluid Capacity | 52.8 gal | 200 L |
| Engine Oil Capacity | 6.6 gal | 25 L |
| Swing Drive Fluid Capacity | 2.2 gal | 8.2 L |
| Alternator Supplied Amperage | 40 amps | |
| Hydraulic System Relief Valve Pressure | 4980 psi | 34335.9 kPa |
| Hydraulic Pump Flow Capacity | 97.7 gal/min | 370 L/min |
| Swing Mechanism | ||
| Swing Speed | 13.9 rpm | |
| Undercarriage | ||
| Number of Shoes per Side | 46 | |
| Shoe Size | 23.6 in | 600 mm |
| Number of Carrier Rollers per Side | 2 | |
| Number of Track Rollers per Side | 7 | |
| Ground Pressure | 6.1 psi | 42.1 kPa |
| Max Travel Speed | 3.4 mph | 5.5 km/h |
| Track Gauge | 7.2 ft in | 2200 mm |
| Buckets | ||
| Reference Bucket Capacity | 1 yd3 | 0.8 m3 |
| Minimum Bucket Capacity | 0.67 yd3 | 0.51 m3 |
| Maximum Bucket Capacity | 1.6 yd3 | 1.2 m3 |
Original machine
| Engine | ||
| Make | ||
| Power Measured @ | 2200 rpm | |
| Net Power Gear 5-6 | 135 hp | 100.7 kw |
| Number of Cylinders | 6 | |
| Max Power | 135 hp | 100.7 kw |
| Displacement | 640.7 cu in | 10.5 L |
| Operational | ||
| Std Operation Weight - Front Axle | 7870.5 lb | 3570 kg |
| Std Operation Weight - Rear Axle | 20128.2 lb | 9130 kg |
| Std Operation Weight - Total | 27998.7 lb | 12700 kg |
| Max Operation Weight - Front Axle | 9986.9 lb | 4530 kg |
| Max Operation Weight - Rear Axle | 21605.3 lb | 9800 kg |
| Max Operation Weight - Total | 31592.2 lb | 14330 kg |
| Fuel Capacity | 74.8 gal | 283 L |
| Oil System Fluid Capacity | 7.7 gal | 29 L |
| Cooling System Fluid Capacity | 12.4 gal | 47 L |
| Hydrauilc System Fluid Capacity | 20.1 gal | 76 L |
| Transmission Fluid Capacity | 23 gal | 87 L |
| Tandem Case Fluid Capacity (each) | 16.9 gal | 64 L |
| Operating Voltage | 24 V | |
| Alternator Supplied Amperage | 19 amps | |
| Transmission | ||
| Type | Cat-built direct drive power shift | |
| Number of Gears - Forward | 6 | |
| Number of Gears - Reverse | 6 | |
| Max Speed - Forward | 25.5 mph | 41 km/h |
| Max Speed - Reverse | 25.5 mph | 41 km/h |
| Steering | ||
| Articulation L/R | 50 degrees | |
| Turning Radius | 24 ft in | 7.3 m |
| Front Axle | ||
| Wheel Lean | 18 degrees | |
| Oscillation - Total | 32 degrees | |
| Ground Clearance | 2 ft in | 610 mm |
| Hydraulic System | ||
| Pump Type | closed-center, constant-pressure system w/ variable displacement piston | |
| Pump Flow | 51 gal/min | 193 L/min |
| Relief Valve Pressure | 2150 psi | 14823.7 kPa |
| Moldboard | ||
| Moldboard Width | 12 ft in | 3650 mm |
| Moldboard Height | 24 in | 610 mm |
| Moldboard Thickness | 0.87 in | 22 mm |
| Max Depth of Cut | 17.7 in | 450 mm |
| Side Shift Left | 26.4 in | 670 mm |
| Side Shift Right | 20.5 in | 520 mm |
| Circle | ||
| Diameter | 60.2 in | 1530 mm |
| Rotation | 360 degrees | |
| Max Reach Outside Tires - Left | 72 in | 1830 mm |
| Max Reach Outside Tires - Right | 73.6 in | 1870 mm |
| Max Lift Above Ground | 17.2 in | 438 mm |
| Blade Tip Angle - Front | 90 degrees | |
| Blade Tip Angle - Rear | 90 degrees | |
| Dimensions | ||
| Height to Top of Cab | 10.9 ft in | 3330 mm |
| Overall Length | 27.3 ft in | 8310 mm |
| Width Over Tires | 7.9 ft in | 2410 mm |
| Wheelbase | 19.4 ft in | 5920 mm |
| Blade Base | 8.4 ft in | 2570 mm |
| Tandem Axle Wheelbase | 5 ft in | 1520 mm |
Available from Stock:
We also have the following used machines for sale, please check the
details below for your reference.
| Used excavator | Hitachi: ex100wd, ex160wd, ex60, ex120, ex200, zx200, zx330, etc. |
| Hyundai: 55, 60, lc130, 200-5d, 210-5d, 215-7, 220lc, r60w-7, etc. | |
| Kobelco: sk60, sk55, sk120, sk07n2, sk200, sk330, sk350, etc. | |
| Daewoo: dh55, dh60, dh150, dh220, dh300, dh130w, dh150w, etc. | |
| : 320b, 320c, 320d, 325b, 325c, 330b, 330c, 330d, etc. | |
| Komatsu: pc60, pc55, pc35, pc200, pc220, pc300, pc78us, pc360, etc. | |
| Volvo: 210blc, 240blc, 290blc, 360blc, 460blc, etc. | |
| Sumitomo: sh135x, 280f2, 200a, 330a, etc. | |
| Used wheel loader | : 936e, 966d, 96e, 966f, 966g, 966h, 980g, etc. |
| Komatsu: wa300, wa320, wa350, wa380, wa400, etc. | |
| Kawasaki: kld65z, kld50z, kld70b, kld80z, etc. | |
| TCM: 75b, 810, etc. | |
| Backhoe: case580l, jcb 3xc, jcb 4cx, etc. | |
| Used bulldozer | : d3c, d6d, d6h, d6r, d7g, d7h, d8k, etc. |
| Komatsu: d85a, d155a, etc. | |
| Used road roller | Dynapac: ca25s, ca25d, ca30d, etc. |
| Ingersoll rand: sd100, sd100d,sd150d, etc. | |
| Bomag: bw213d, bw217d, | |
| Used motor grader | : 12g, 120g, 14g, 140g, 140h, 140k, etc. |
| Komatsu: gd511a, gd623a, gd505a, gd605r, etc. |
Any interest to the items, pls do not hesitate to contact me. We
highly welcome you to our yard to inspect the machines.
Packaging & Shipping:
1.Container: The cheapest and fast one ;put the machine into
container need disassemble .
2.Flat rack: Often used to ship two wheel loader,max load-bearing
is 35tons.
3.Bulk cargo ship: which is better for bigger construction
equipment,no need disassemble.
4.RO RO ship: The machine is driven directly into the ship and does
not need to be disassembled.
Our customer:
Our company professionally export all kinds of used construction
& engineering machinery for many years, our products including
Excavator, Bulldozer, Loader, Crane, Grader, Road roller, Forklift.
The brands include , Hitachi, komatsu, Daewoo, Kobelco, Hyundai,
Volvo, Kawasaki, KATO, Tadano and so on, we have customers from The
Southeast Asia, Africa,The Middle East,The South America,and we are
looking for the long and good business relationships with you !
Our service:
1>Book hotel for u
2>Go to the airport to pick u up
3>Translate for u and guide u when u are free
Pre-sale and after-sale service:
1,Testing-Loading-Shipping-one stop service
2,Clean and tight.all function work powerful and energetic.
3,full-check on machine and maintenance.oil ,fuel change ,
cleaning & repaint machine if you want
4.Guarantee two years .
Payment:T/T ,Western union/money gram/cash
Package:container bulk cargo ro-ro cargo
Delivery time:within 3 days after receipt of payment
FAQ:
1. How to guarantee the condition and lifetime of the machine ?
A: We choose good condtion and less hour used machines. We are
available for third part certificate of all of the machines.
And they are all available for your inspection in its place.
2. How to have after sale service from us ?
A: We have old suppliers in China, used or new parts are available
for us to get, with reasonable price and in short time.
3. How can customers make visit and checking in China ?
A: We arrange everything ready for your jouney in China, welcome
your happy visit!~
