Active Member
|
[China]
Address: NO.2169 FANGHE ROAD SHANGHAI CHINA
Contact name:JACKY
C Y Q International Trading Co.,Limited |
|
|
Used 980G payloader used CAT Wheel Loader CAT 980 shovel
1> Good working condition machine in Shanghai China
2> All parts are wll-maintenanced, original. can be inspected
3> Low working hours, original paint, cheap and high quality
4> Spare parts available, best working machine for you
| MAKE | ||
| MODEL | 3306 | |
| NET POWER | 220 hp | 164.1 kw |
| GROSS POWER | ||
| POWER MEASURED @ | 2200 rpm | |
| DISPLACEMENT | 640.7 cu in | 10.5 L |
| NUMBER OF CYLINDERS | 6 | |
| ASPIRATION | Turbocharged | |
| Operational | ||
| OPERATING WEIGHT | 45161.7 lb | 20485 kg |
| FUEL CAPACITY | 80.3 gal | 304 L |
| HYDRAUILC SYSTEM FLUID CAPACITY | 54.2 gal | 205 L |
| ENGINE OIL FLUID CAPACITY | 7.4 gal | 28 L |
| COOLING SYSTEM FLUID CAPACITY | 10.8 gal | 41 L |
| TRANSMISSION FLUID CAPACITY | 15.6 gal | 59 L |
| FRONT AXLE/DIFF FLUID CAPACITY | 12.4 gal | 47 L |
| REAR AXLE/DIFF FLUID CAPACITY | 12.4 gal | 47 L |
| STATIC TIPPING WEIGHT | 30825 lb | 13982 kg |
| TURNING RADIUS | 22.2 ft in | 6779 mm |
| OPERATING VOLTAGE | 24 V | |
| ALTERNATOR SUPPLIED AMPERAGE | 50 amps | |
| REAR AXLE OSCILLATION | 26 degrees | |
| TIRE SIZE | 26.5-25 14PR | |
| Transmission | ||
| TYPE | Planetary powershift | |
| NUMBER OF FORWARD GEARS | 4 | |
| NUMBER OF REVERSE GEARS | 4 | |
| MAX SPEED - FORWARD | 23.4 mph | 37.6 km/h |
| MAX SPEED - REVERSE | 26.5 mph | 42.6 km/h |
| Hydraulic System | ||
| RELIEF VALVE PRESSURE | 3000 psi | 20684.3 kPa |
| PUMP FLOW CAPACITY | 79.8 gal/min | 302 L/min |
| RAISE TIME | 7.1 sec | |
| DUMP TIME | 2 sec | |
| LOWER TIME | 2.4 sec | |
| Bucket | ||
| BREAKOUT FORCE | 48446 lb | 215.5 kN |
| DUMP CLEARANCE AT MAX RAISE | 9.3 ft in | 2845 mm |
| BUCKET WIDTH | 10.2 ft in | 3107 mm |
| BUCKET CAPACITY - HEAPED | 4.7 yd3 | 3.6 m3 |
| BUCKET CAPACITY - STRUCK | 4 yd3 | 3.1 m3 |
| Dimensions | ||
| LENGTH WITH BUCKET ON GROUND | 27.4 ft in | 8366 mm |
| WIDTH OVER TIRES | 9.6 ft in | 2935 mm |
| HEIGHT TO TOP OF CAB | 11.8 ft in | 3585 mm |
| GROUND CLEARANCE | 1.6 ft in | 476 mm |
| WHEELBASE | 11 ft in | 3350 mm |
| HINGE PIN - MAX HEIGHT | 13.5 ft in | 4118 mm |
| REACH AT MAX LIFT AND DUMP | 4.6 ft in | 1398 mm |
OUR MACHINERY:
We also have the following used machines for sale, please check the
details below for your reference.
| Used excavator | |||||||
| Hitachi | Hyundai | Kobelco | Daewoo | Kumatsu | Volvo | Sumitomo | |
| Ex100wd, ex60, ex160w-1, ex120, ex200, zx200, zx300, etc. | 55,60, lc130-5, 130wd-5, 200-5, 210-5d, 220lc-5, 210w-5, etc. | Sk60, sk55, sk120, sk07n2, sk200, sk330, sk350, sk210, etc. | Dh55-5, dh60-7, dh220-7, dh250, dh300, dh55, dh60, etc. | 305.5, 307b, 307c, 320b, 320c, 320d, 325b, 325c, 325d, 330b, 330c, etc. | Pc60, pc35, pc55, pc200, pc220, pc210, pc300, pc360, pc350, etc. | 210blc, 240blc, 290blc, 360blc, ec55, 460blc, etc. | 280f2, 200a1, 200a2, 200a3, 330a3, etc. |
| Used wheel loader | ||||
| Kumatsu | Kawasaki | Tcm | Backhoe | |
| 936e,938, 950b,966d, 966e,966f, 966g,etc. | Wa300-1, wa320-1, wa360-3, wa380, wa400, etc. | Klld65z, kld50z, kld70b, kld85z, etc. | 75b, 810, etc. | Case580l, case580, case580m, jcb 3cx, jcb 4cx, etc. |
| Used bulldozer | |
| Komatsu | |
| D3c,d4h, d5h,d6c, d6d,d6h, d6g,d6r, d7g,d7h, d8k,etc. | D85a-18, d85a-21, d155a-a, d155a-2, d155a-3, etc. |
| Used road roller | ||
| Dynapac | Ingersoll rand | Bomag |
| Ca25s, ca25d, ca25pd, ca30d,etc. | Sd100, sd100d, sd150d, etc. | Bw213d-2, we217d-2, bw219d-2, etc. |
| Used motor grader | |
| Komatsu | |
| 120g,12g, 14g,140h, 140g,140k, etc. | Gd511a, gd623a, gd505a, gd605r, etc. |
PACKING & SHIPPING:
1.Container: The cheapest and fast one ;put the machine into
container need disassemble .
2.Flat rack: Often used to ship two wheel loader,max load-bearing
is 35tons.
3.Bulk cargo ship: which is better for bigger construction
equipment,no need disassemble.
4.RO RO ship: The machine is driven directly into the ship and does
not need to be disassembled.
OUR SERVICES:
Pre-Sales Service
We trust that customer satisfaction is the only benchmark to
inspect our works.
1.Airport picking
2.Hotel booking
3.Translating and guiding during your visit in Shanghai
After-Sales Service:
1. Training how to instal the machine, training how to use the
machine.
2. Engineers available to service machinery overseas.
FAQ:
1. How to guarantee the condition and lifetime of the machine ?
A: We choose good condtion and less hour used machines. We are
available for third part certificate of all of the machines.
And they are all available for your inspection in its place.
2. How to have after sale service from us ?
A: We have old suppliers in China, used or new parts are available
for us to get, with reasonable price and in short time.
3. How can customers make visit and checking in China ?
A: We arrange everything ready for your jouney in China, welcome
your happy visit!~
