|
[China]
Trade Verify
Address: 504,A Bld.,YiQuan Industry Park,FuQian Road No.434, FuCheng Street, Shenzhen, China 518110
Contact name:Ena Lin
Gezhi Photonics (Shenzhen) Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
1:1 OLP equipment 1+1 Optical Line Protection Switch System 1310/1550nm
GEZHI OLP(Optical Line Protection) equipment is a device used in pairs, one at each end of the optical signal to protect network transmission line. The OLP euipment uses vacant optical fiber from different route to build a backup path. It can realize optical power monitoring and automatic switching. By real-time monitoring the power status in working fiber. it can automatically switch from working fiber to backup fiber when the power value of working fiber lower than a user defined threshold . In optical communication network, OLP monitors optical power of optical fibre and standby optical fibre at real time. In case the current optical power of optical fibre is less than pre-set switching threshold value, then alarm is on and it would switch to standby optical fibre automatically to protect optical transmission system line.
Features
Low insertion loss
Transparent transmission characteristics
Business non-invasive switch
Reduce the loss caused by line fault
High level of integration by plug-in design, which saves space of
cabinet
Increase the reliability of the transmission network, improve
network quality
Expansion is very convenient
OLP adopts the design of 1 U-high and can be installed into a standard 19'' metal chassis. It applies at 1+1 optical line backup system(1:1 optical line backup system). When the optical main line breaks down, It can maintain the signal transmission by automatically switch to backup line.
1+1 protection illustration:
Functional Features
Indicator light shows the status of optical line at the port
Switching threshold power and alarming threshold power can be set up by LCD screen or network management access
Two kinds of operating mode available: automatically and manually return to main line.
The main equipments at receiving site have three modes for switching: automatic, forced manual and remote control
The automatic switch time is less than 20ms
Dual hot redundancy power supply and hot-pluggable
With CLI remote network management
Specification
| System Parameter | Technical Index | |
| Calibration Wavelength | 1310nm & 1550nm | |
| Insertion Loss at Transmitting side | < 4.0dB | |
| Insertion Loss at receiving side | < 1.5dB | |
| Return Loss | ≥ 45dB | |
| Interference | > 55dB | |
| Polarization Loss | <0.1dB | |
| Detecting Range of optical Power | -50~20dBm | |
| Switching time | < 20ms | |
| Auto-switching Threshold Power | -30dBm | |
| Switching Mode | Automatic, forced Manual, Remote | |
| Input/Output Optical Access Port | SC/APC,SC/PC,FC/APC,FC/PC | |
| Network Management Access Port | RJ45,RS232 | |
| Network Management Mode | CLI | |
| Product's Dimension | 19-inch standard metal chassis | |
| Environmental Requirement | Operating Temperature | -10℃ ~ 60℃ |
| Storage Temperature | -40℃ ~ 80℃ | |
| Relative Humidity | 5% ~ 95% , no-condensing | |
| Power Supply (Standard) | 220V/AC,50Hz; -48V/DC(Optional) | |
| Safety and EMC | Compliant with FCC,UL,CE,TUV,CSA Standards | |
| Power Consumption | < 5W | |
1:1 Protection Illustration
Functional Features
Indicator light shows the status of optical line at the port
Switching threshold power and alarming threshold power can be set up by LCD screen or network management access
The main equipments at receiving site have three modes for switching: automatic, forced manual and remote control
The automatic switch time is less than 40ms
Dual hot redundancy power supply and hot-pluggable
With CLI remote network management
Technical Parameter
| System Parameter | Technical Index | |
| Calibration Wavelength | 1310nm &1550nm | |
| Insertion Loss at Transmitting side | < 1.5dB | |
| Insertion Loss at receiving side | < 1.5dB | |
| Return Loss | ≥ 45dB | |
| Interference | > 55dB | |
| Polarization Loss | <0.1dB | |
| Detecting Range of optical Power | -50~20dBm | |
| Switching time | < 40ms | |
| Auto-switching Threshold Power | -30dBm | |
| Switching Mode | Automatic, forced Manual, Remote | |
| Input/Output Optical Access Port | SC/APC,SC/PC,FC/APC,FC/PC | |
| Network Management Access Port | RJ45,RS232 | |
| Network Management Mode | CLI | |
| Product's Dimension | 19-inch standard metal chassis | |
| Environmental Requirement | Operating Temperature | -10℃ ~ 60℃ |
| Storage Temperature | -40℃ ~ 80℃ | |
| Relative Humidity | 5% ~ 95% no-condensing | |
| Power Supply (Standard) | 220V/AC,50Hz；-48V/DC(Optional) | |
| Safety and EMC | Compliant with FCC,UL,CE,TUV,CSA Standards | |
| Power Consumption | < 5W | |
