Active Member
|
[China]
Address: Floor 5, Bulding A , Rongxun High-tech Industrail Park, Qinghu Community, LongHua District, ShenZhen(518109)
Contact name:Iris Huang
Shenzhen Wangtong Industry Company Limited |
|
|
40G QSFP+ MPO MPT 1310nm 2KM 40GBase Ethernet Ethernet Module for Telecommunication
Description
40Gb/s QSFP+ PSM 2km is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel . and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 2km using single mode fiber. These modules are designed to operate over single mode fiber systems using 1310nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver which provides increased port density and total system cost savings.
Feature
● Four-channel full-duplex transceiver modules
● Transmission data rate up to 11.2Gbit/s per channel
● Up to 2km transmission of single mode fiber
● DFB laser array inside
● Low power consumption <2.0W,
● Operating case temperature 0°C to +70°C
● 3.3V power supply voltage
● RoHS 6 compliant
● Hot Pluggable QSFP form factor
● Single MPO connector receptacle
● Built-in digital diagnostic function
Application
Parameter
| Part Number | Data Rate | Distance | Wavelength | Output Power | Sensitivity | Remark |
| FQFP-I9-M85-X1D | 40Gbps | MM 100m (OM3) | 850nm | -7.6 ~ -1dBm | -10dBm | QSFP+ 40G-SR4 |
| FQFP-I9-M85-X3D | 40Gbps | MM 300m (OM3) | 850nm | -7.6 ~ +2.4dBm | -10dBm | QSFP+ 40G-eSR4 |
| FQFP-I7-C13-02D | 40Gbps | SM 2km | 1310nm | -2 ~ +3.5dBm | -11.5dBm | QSFP+ 40G-IR4 |
| FQFP-I7-C13-10D | 40Gbps | SM 10km | 1310nm | -7 ~ +2.3dBm | -11.5dBm | QSFP+ 40G-LR4 |
| FQFP-I7-C13-40D | 40Gbps | SM 40km | 1310nm | -2.7 ~ +4.5dBm | -11.5dBm | QSFP+ 40G-ER4 |
| FQFP-I9-S13-02D | 40Gbps | SM 2km | 1310nm | -7 ~ +1.5dBm | -11.5dBm | QSFP+ 40G-PSM IR4 |
| FQFP-I9-S13-10D | 40Gbps | SM 10km | 1310nm | -7 ~ +1.5dBm | -14.4dBm | QSFP+ 40G-PSM LR4 |
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Supply Voltage | Vcc | -0.5 | 3.6 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Relative Humidity | RH | 0 | 85 | % | |
| Rx Damage Threshold,per Lane | PRdmg | 5.5 | dBm |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.
Recommended Operating Conditions
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Data Rate | DR | 103.1 | Gb/s | |||
| Supply Voltage | Vcc | 3.14 | 3.3 | 3.47 | V | |
| Supply Current | Icc | 0.9 | A | |||
| Operating Case Temp. | Tc | 0 | 70 | °C |
Electrical Characteristics (Top=0~70℃, Vcc=3.14~3.47V)
(Tested under recommended operating conditions,unless otherwise noted)
| Parameter | Symbol | Min | Typ | Max | Unit | Notes | ||
| Receiver | ||||||||
| Signaling rate per lane | DRPL | 25.78125 ± 100 ppm | Gb/s | |||||
| Differential data output swing | Vout,pp | 400 | 800 | mV | ||||
| Eye width | Ew | 0.57 | UI | |||||
| Vertical eye closure | 5.5 | dB | ||||||
| Differential output return loss (min) | RLd(f) | 9.5 – 0.37f, 0.01≤f<8 4.75 – 7.4log10(f/14), 8 ≤f<19
| dB | |||||
Common to differential mode conver- sion return loss (min)
| RLdc(f) | 22-20(f/25.78), 0.01≤f<12.89 15-6(f/25.78), 12.89≤f<19
| dB | |||||
| Differential termination mismatch | Tm | 10 | % | |||||
| Transition time, 20% to 80% | Tr,Tf | 12 | ps |
| ||||
Optical Characteristics (Top=0~70℃, Vcc=3.14~3.47V)
(Tested under recommended operating conditions,unless otherwise noted)
| Parameter | Symbol | Unit | Min | Typ | Max | Notes | ||||
| Receiver | ||||||||||
| Receive Rate for Each Lane | Gb/s | 25.78125 ±100 ppm | 1 | |||||||
| Four Lane Wavelength Range | λ1 | nm | 1294.53 | 1295.56 | 1296.59 | |||||
| λ2 | 1299.02 | 1300.05 | 1301.09 | |||||||
| λ3 | 1303.54 | 1304.58 | 1305.63 | |||||||
| λ4 | 1308.09 | 1309.14 | 1310.19 | |||||||
| Overload Input Optical Power | Pmax | dBm | 5.5 | |||||||
Average Receive Power for Each Lane | Pin | dBm | -10.6 | 4.5 | 2,4 | |||||
| Receiver Sensitivity(OMA)per lane | Psens1 | dBm | -10.6 | |||||||
| Stressed Sensitivity(OMA) per lane | Psens2 | dBm | -6.8 | 3 | ||||||
| Return Loss | RL | dB | -26 | |||||||
| Receiver Electrical 3dB upper cutoff frequency, per lane | GHz | 31 | ||||||||
| Los De-Assert | Pd | dBm | -11.6 | |||||||
| Los Assert | Pa | dBm | -23.6 | |||||||
| Loss Hysteresis | Pd-Pa | dBm | 2 | |||||||
Ordering Information
| Description |
| QSFP+,40Gb/s, PSM 1310nm(4x10G) 2Km, 0~70℃ MPO |
