Active Member
|
[China]
Address: No. 601, Anxin Road, ShaCheng Street,Economic And Technological Development Zone,Wenzhou,Zhejiang Pro.China
Contact name:
Zhejiang Wellnit Mechanical Technology Co.,Ltd |
|
|
Stainless Steel Plate Edge chamfering Machine 6mm - 60mm Clamp Thickness
Main performance
PB-80 automatic progressive milling machine adopts dense tooth
milling cutter head to milling groove,
single blade to cut groove, the blades are CNC NC milling blades, a
blade has four use surfaces,
customer use low cost, high efficiency. The control box and the
electric box are placed separately, which
makes the machine operation safer. This is a convenient, fast,
efficient and cost-saving automatic
portable steel plate milling machine.
Technical Parameter
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | |
Carbon Steel
Stainless Steel
Aluminium Alloy , Etc |
There are many types of automatic marching milling machine, PB-80
this double-motor milling machine,
machine power, processing efficiency is the highest. The spindle of
the machine can be adjusted speed,
for carbon steel, stainless steel, aluminum alloy and other
different materials, plate hardness is different,
spindle speed can be different. If the hardness of the plate is not
high, the speed of the spindle can be
adjusted faster; if the hardness of the plate is relatively high,
the speed of the spindle can be adjusted
slower, so as to reduce the loss of the machine.
Details of Product
The blue rubber handle in the picture is used to adjust the groove
angle of the plate.
The nut on both sides of the dial is sent to adjust the handle to
adjust the groove angle.
The yellow rubber wheel seen in the picture is the lower rubber
wheel. There are two black plastic rotating
handwheels under the white board.
When the hand wheel is rotated, the lower rubber wheel will rise,
thus holding the steel plate.
