Outdoor Camping Tent TC4 Titanium Ground Nail 8x200 8x240 8x300mm

Φ8x200,Φ8x240,Φ8x300mm outdoor camping tent TC4 titanium ground nail.

Description

90% of medical device implant components are made of Ti6Al-4V titanium alloy. Due to its light weight, high strength and high biocompatibility, titanium alloy 6AL-4V has become the most commonly used material for medical implant devices. Titanium alloy 6AL-4V is usually used in the production of hip joints, bone screws, knee joints, bone plates, dental implants, and spinal connection components. Titanium alloy has the characteristics of work hardening. The cutting angle is large during the machining process, the chips produced are thin, and a relatively small contact area is formed on the tool. In addition, the high cutting force during the machining process, combined with the frictional force during chip flow, will comprehensively lead to excessively high local cutting heat of the tool.

Advantages of titanium alloys:

1. High strength

The density of titanium alloy is generally about 4.51g/cm3, which is only 60% of steel. The density of pure titanium is close to that of ordinary steel. Some high-strength titanium alloys exceed the strength of many alloy structural steels.

2. High thermal strength

The operating temperature is several hundred degrees higher than that of aluminum alloys, and the required strength can still be maintained at moderate temperatures, and it can work for a long time at a temperature of 450 to 500 °C. The specific strength of aluminum alloy decreases significantly at 150 °C.

3. Good corrosion resistance

Titanium alloy works in humid atmosphere and seawater medium, and its corrosion resistance is much better than stainless steel; its resistance to pitting corrosion, acid corrosion and stress corrosion is particularly strong.

Company Display

Plating Line

Work shop

Test Equipment

Q1: Are you trading company or manufacturer?

A: We are a manufacturer with more than 10 years experience in machine parts and machine manufacturing industry

Q2:. How do you control the quality?
A: (1)Material inspection--Check the material surface and roughly dimension.
(2)Production first inspection--To ensure the critical dimension in mass production.
(3)Sampling inspection--Check the quality before sending to the warehouse.
(4)Pre-shipment inspection--100% inspected by QC assistants before shipment

Q3: What information should I give for quotation?
A: If you have 2D or 3D drawings,please send to us.And let us know your special requirements,such as materials,tolerance,surface treatment,and the quantity you need.Thank you!