Home Companies Hunan AUK New Energy Co., Ltd.

Electrical 3.7v Lithium Ion Polymer Battery 8000mAh For POWER BANK

Hunan AUK New Energy Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 11F, Huakun Building, No.200 Section 2 Xiangfu East Road, Dongjing Street, Yuhua District, Changsha, China.

Contact name:Jimmy

Inquir Now

Hunan AUK New Energy Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Electrical 3.7v Lithium Ion Polymer Battery 8000mAh For POWER BANK

Country/Region china
City & Province changsha
Categories Electrical Ceramics
InquireNow

Product Details

Custom LiPo Battery 3.7v 8000mAh Lithium ion Polymer battery For POWER BANK
 
Specification
 

Model:2P 3766125
Size:125/66/3.7mm(L*W*H)
Operating Temperature:-20°C-60°C
Capacity:8000 mAh
Rated Voltage: 3.7V
Charging temperature: 0°C-50°C
Charging voltage: 4.2 volts
Discharge voltage: 2.75 volts
Place of origin: China
Battery Type: Lithium Polymer
Chemical type: lithium polymer
Protection function: overcharge, overdischarge, overcurrent, short circuit


Usage:
Remote controller, IPTV Set top box remote controller, LED lighting, Underwater lighting system, Bluetooth device, Mp3/Mp4 player, Safety lamp, GPS, Mobile phone, E-book, Power bank, Portable DVD, Walkie taklie, Notebook, Tablet PC, PDA, Game player, Pos machine, Consumer electronics device, Medical devices, Flash lighting, Garden lighting, Karaoke, Digital Camera, Driving recoder, Recording pen, Headset , Dashcam, Satnav, Navigation, Baby monitor, Navigation, Car camera, Drift camera, Taillight, Bluetooth speaker, Instrumentation, Smart lock, Medical device, Digital light, Air purifier, Project Desigh ,Valve Index Controller ,etc.


Features
AUK
2P 3766125 3.7V, 8000mAh rechargeable lithium battery - LiPo battery.
Built in intelligent protection PCB charging module, effectively preventing overcharging, discharging, overcurrent, and short circuit.

 

Electrical characteristics:
1. if your device still have a PCM protector board lie on motherboard of your device. it will can't work well.
please remove off this PCM from our this li battery. so this battery can work well.
2. if your old one li battery have a PCM board on top of li battery. please instead this old pcm to our new li battery . maybe our PCM board don't fit your device. each device there are different requirements with PCM board.
3.Standard Charging method :0.5C (constant current)charge to 4.2V,then CV(constant voltage 4.2V)charge till charge current decline to ≤0.05C
4. Rated Capacity : The capacity means the discharge capacity of the cell, which is measured with discharge current of 0.2C with 3.0V cut-off voltage after standard charge.
5. Charging time :Standard Charging:3.0 hours(Ref.) ,Rapid charge: 2.0 hours(Ref.)
6. Max. charge current :1.0C
Max. discharge current :1.0C
Discharge cut-off voltage :3.0V
7. Operating temperature :Charging: -20℃~60℃ Discharging:-20℃~60℃
8. Storage temperature : -10℃~ +45℃
9. Cycle life: 600 cycles,Stable performance with 100% in house testing
10. Warranty: 18 Months
11. Test condition:
Charge:0.5C to 4.2V
Discharge:0.2C to 3.0V
70% or more of 1st cycle capacity at 0.2C discharge of Operation
Self-discharge :Residual capacity >90%
After the standard charging, storied the cells under the condition for 30 days, then measured the capacity with 0.2C till 3.0V
12:Temperature characteristics :
-20℃: ≥65%
23℃: 100%
60℃: ≥96%
---- According to item at 23±5℃.
----Capacity comparison at each temperature, measured with constant discharge current 0.2C with 3.0V cut-off. Percentage as an index of the capacity compared with 100% at 23℃
13 : Mechanical characteristics:
----- Vibration Test : No leakage / No fire
After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz an 55Hz,the excursion of the vibration is 1.6mm.The cell shall be vibrated for 30 minutes per axis of XYZ axes.
----- Drop Test : No fire/ no leakage.
The cell is to be dropped from a height of meter twice onto concrete ground.
 
 

 

AUK LI-polymer Battery connector

 

AUK Lithium Polymer Batteries Customized PCB as customer request

 

 

 

AUK Li-Polymer Batteries Production Line and Progress

AUK Small Lipo Battery/Ultra thin Lithium Polymer Battery packing

 

 
Company Information

Hunan AUK New Energy Co., Ltd. (AUK Power)

 

 

We are a professional experienced supplier of Small 55mAh Lipo Batteries, If the items you need are not list in our AUK website, or you need more or less qty, pls feel free to contact us to get a special discount.

 

 

Hot Products

Customized Lipo Pouch Cell 804040 Lithium Ion Battery 3.7v 1800mah Li-Ion Polymer Battery Specificat...
Lithium polymer battery 706090 3.7V 5000mAh lipo battery Items Parameter Battery model AUK706090 ...
3.7V 4000mAh Li Ion Battery Cells INR21700 Used In E-bike Scooter Battery Specification: Battery ...
48V 20Ah Li Ion Battery Cells 48V Electric Bicycle Lithium Battery Pack Specification Brand Name AUK ...
New Sodium Na Ion Battery 3000 Cycles Brand New 18ah 3v Cylindrical Sodium Ion Battery Cell ...
3.2V 6000mAh LiFePO4 Battery Cell 32700 LFP For Electric Scooter Specification Brand Name AUK Model ...