Home Companies Changsha Xingheda Technology Co., Ltd

Huawei OptiX OSN3500 02113256-1 Gold Line STM-64/STM-16 Level MSTP OSN3500 Subrack

Changsha Xingheda Technology Co., Ltd

Contact Us

[China] country

Trade Verify

Address: 2506 Xidi Building, No. 8 Fenglin Third Road, Yuelu District, Changsha City, Hunan Province

Contact name:Amy Lee

Inquir Now

Changsha Xingheda Technology Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Huawei OptiX OSN3500 02113256-1 Gold Line STM-64/STM-16 Level MSTP OSN3500 Subrack

Country/Region china
City & Province changsha hunan
InquireNow

Product Details

Huawei OptiX OSN3500 02113256-1 Gold Line STM-64/STM-16 level MSTP OSN3500 Subrack

 

Product Description:

 

OptiX OSN 3500 is mainly used at the convergence layer and

backbone layer of the metropolitan area network (MAN).In TDM networking, can be networked with the other OptiX transmission equipment (the OptiX OSN 9560, OptiX OSN 9500, OptiX OSN 7500 II, OptiX OSN 7500, OptiXOSN 3500 II, OptiX OSN 2500, OptiX OSN 1500, OptiX OSN 500, and OptiX OSN 550) to optimize the carrier's investment.

With the packet switching technology, can constitute a packet data transmission network with the other OptiX transmission equipment to meet the requirement for bearing IP services.

Can be flexibly networked with WDM equipment and Metro equipment.

Can transparently transmit services over third-party Layer 2 networks, allowing end-to-end configuration and management.

 

Specifications:

 

Indicator and Specifications

Description
Dimensions (H x W x D)722 mm x 497 mm x 295 mm
Number of valid slots15 for processing boards and 16 for interface boards
Equipment capacityPacket160 Gbit/s
TDM200 Gbit/s higher order cross-connections and 20 Gbit/s lower order cross-connections
Service type supportedSDH, PDH, ATM, CES, Ethernet , PCM, SAN, video and others
Network topologyPoint-to-point, chain, star, ring, ring with chain, intersecting rings, tangent rings
Backup and protectionNetwork-level protection (packet)Tunnel 1:1/1+1 APS, PW 1:1/1+1 APS, packet linear MSP, LPT, MSTP, MRPS
Network-level protection (TDM)

SDH protection: subnet connection protection, linear MSP, ring MSP , DNI protection, shared-fiber virtual path protection, optical-path-shared MSP

EoS protection: LCAS, LPT, STP/RSTP, MSTP, ERPS, RPR, VP-Ring/VC-Ring protection

Device-level protection

Packet: LAG, MC-LAG

TDM: TPS, BPS, PPS, LAG, DLAG, 1+1 protection for ATM boards, 1+1 protection for wavelength conversion units

1+1 hot backup for cross-connect and timing units

1+1 hot backup for SCC units

1+1 hot backup for power input units

1:N protection for +3.3 V power supply of the board

Intelligent fan

Board protection modes under abnormal conditions

MaintenanceMPLS OAMCV, FFD, BDI, FDI, Ping, Traceroute
MPLS TP OAMCC, RDI, AIS, LB, LT, LM (only single-ended LM), DM, TST, LCK, CSF (only PW CSF)
ETH OAM (packet)

Ethernet service OAM: CC, LB, LT, LM (only single-ended LM), DM (only two-way DM)

Ethernet port OAM: OAM auto-discovery, link performance monitoring, remote loopback, fault detection, self-loop detection

ETH OAM (TDM)

Ethernet service OAM: CC, LB, LT, OAM_Ping

Ethernet port OAM: OAM auto-discovery, link performance monitoring, remote loopback, fault detection, self-loop detection

SynchronizationPacket

Physical-layer clock (SDH)

Synchronous Ethernet

IEEE 1588v2

CES ACR

TDMPhysical-layer clock (SDH)
DCNOutband DCNHWECC, IP over DCC, OSI over DCC
Inband DCNHWECC, IP
TP-Assist

Service configuration: supports end-to-end service configuration and automatic deployment of alarm management.

Service commissioning: supports the one-click service connectivity test, one-click service performance test, and automatic test without any instrument.

Routine maintenance: supports performance statistics and monitoring and E-Line and E-LAN service path visualization.

Fault diagnosis: supports intelligent fault locating, IP ping response, and service loopback detection.

Standard working voltage

If the standard voltage of the input power is -48 V, the power voltage ranges from -38.4 V to -57.6 V.

If the standard voltage of the input power is -60 V, the power voltage ranges from -48 V to -72 V.

Installation methodETSI cabinet
Equipment running environmentSubrack temperature

Long-time operation: 0ºC to 45ºC

Short-time operation: -5ºC to +55ºC

Subrack humidity (relatively)

Long-time operation: 5-85%

Short-time operation: 5-95%

Reliability specificationsSystem availability0.9999964
Mean time to resolution (MTTR)1 h
Mean time between failures (MTBF)31.83 years

 

Product Details:

 

If you are interested, please let us know the specific model. We will provide the best service and the best price!




 

 

Pr

Hot Products

ZTE BPQ2 for BBU8200 BBU baseband of Wireless Networking Equipment ​ B8200 B8300 CARD LIST: SA/SA0...
ZTE ZXSDR R8862A S2100 D6B 100V-240V 5A-2.5A GSM/LTE Product Description: ZXSDR BS8912 is a compact ...
ZTE ZXSDR RRU 8862A R8862A S1800 B3 D4B LTE GSM/UMTS WCDMA 1800 MHz Product Description: ZXSDR ...
ZTE ZXSDR RRU 8862A R8862A S1800 B3 D4A LTE GSM/UMTS WCDMA 1800 MHz Product Description: ZXSDR ...
ZTE ZXSDR R8862A S2100 D6A 4G B1TD-LTE FDD GSM/UMTS Product Description: ZXSDR BS8912 is a compact ...
ZTE ZXSDR R8862A S2100 A4B AC ZTE RRU8862A S2100 4A-2A Product Description: ZXSDR BS8912 is a ...