Pressure Piping And In Pressure Vessel Fabrication Carbon Steel
Pipe Elbow
Carbon steel elbow is a metal pipe fitting that changes the
direction of the carbon steel pipe.Connection mode: wire buckle and
welding.According to the Angle points, there are 45° and 90°180°
three more commonly used, in addition, according to the needs of
the project also includes 60° and other abnormal Angle elbow.
Elbow materials are cast iron, stainless steel, alloy steel,
malleable cast iron, carbon steel, non-ferrous metal and plastic,
etc.The ways of connecting with the pipe are: direct welding (the
more common way) flange connection, hot melt connection, electric
melt connection, thread connection and socket connection, etc.
According to the production process can be divided into: welding
elbow, stamping elbow, push elbow, casting elbow and so on.Other
names: 90 degree bend, right Angle bend, etcCarbon steel elbow can
be divided into long radius elbow and short radius elbow according
to its radius of curvature.Long radius elbow refers to the outer
diameter of the pipe whose radius of curvature is equal to 1.5
times, i.e., R= 1.5d.Product furnished to this specifification
shall conform to the requirements of Specifification A960/A960M,
including any supplementary requirements that are indicated in the
purchase order. Failure to comply with the requirements of
Specifification A960/A960M constitutes non-conformance with this
specififi-cation. In case of a conflflict between the requirements
of this specifification and Specifification A960/A960M, this
specifification shall prevail.
product | Carbon Steel Pipe Elbow |
standard | Astm a234 B16.9 |
material | wpb wpc st37 st52 |
thickness | sch20 sch40 STD XS SCH80 |
elbow type | seamless or welded |
certification | iso 9001 ce ansi |
connection | welded butt welding |
degree | 30 45 60 90 180 |