|
[China]
Trade Verify
Address: Building 9, No.1188, Lianhang Rd, Minhang District, Shanghai, China
Contact name:Sandy Yang
Shanghai Runwell Machinery Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
This cone crusher DP series is a new type, combined the technology of single-cylinder cone crusher and PYY cone crusher, and adopted the advanced and optimized design concept. Applying better crushing frequency and eccentric distance, the percentage of medium fine particles is high, about 80% is smaller than the discharge port size, which can greatly improve the processing capacity of the subsequent equipments, and lower the whole power consumption.
The handing capacity is greatly improved, due to the successful combination of crushing chamber of high performance and high crushing frequency; By adopting layer-crushing technology, most of the final particles are in cubic shape, which has hugely reduced the flaky particles.
1.DP Series Single Cylinder Hydraulic Cone Crusher has reached the international advanced level, which realizes all automation in control. Single Cylinder makes the adjustment more convenient, the discharging opening can even be adjusted when at work.
2.The intellectual auto control system makes the crusher work in the best condition, meanwhile, it can realize auto compensation for the wearing of the in and out cone liner plates.
3.The user can effectively and exactly control the size of the
discharging opening through the keyboard; also the user can press
the few buttons on the keyboard to accomplish the compensation of
the wearing parts automatically.
4.Meanwhile, the single cylinder construction makes the machine
more compact with less oil pipes and outer adjusting device thus to
make the single cylinder hydraulic cone crusher simple in
construction, light in weight with higher capacity, it is one of
the most advanced cone crushers in China.
Single cylinder hydraulic cone crusher work, the rotation of the motor through the pulley or coupling, drive shaft and the cone of force in the eccentric sleeve moving around a fixed for rotary movement, so that the cone crusher in the crushing wall and near and sometimes leave is fixedly arranged on the regulating sleeve rolling white surface, the ore constantly under attack in the crushing cavity, extrusion and bending and crushing ore achieved. At unbreakable foreign body through the crushing chamber or for some reason silica sand single cylinder hydraulic cone crusher is overloaded, the spring system of insurance, the mouth of discharge increases, foreign bodies from the crushing chamber is discharged, such as blocking in row ore using cavity cleaning system, so that the discharging continues to increase, so that the foreign body removal of crushing cavity.
Single cylinder hydraulic cone crusher features
1.Self-protection, the parts can not be damaged when hard materials
such as the metals goes into the crushing cavity ;
2.Stable running performance and easy operation;
3.High quality wear-resistant parts reduce operating cost;
4.Long life and large application.;
5.A rib liner is provided inside the bottom section of the frame to
help protect it from wear .
6.Hydraulic Cone Crusher is equipped with a hydraulic protecting
system including protecting oilcan, locking oilcan and hydraulic
driving oilcan, which deal with all kinds of problems during the
operation without disassembling the machine.
| Model | DP-100 | DP-160 | DP-250 | DP-300 | |
| Motor power(kw) | 75-90 | 110-160 | 132-250 | 200-315 | |
| Stroke(mm) | 16,20,25 | 18,25,32,40 | 18,25,32,40 | 18,25,32,40 | |
| Weight (T) | 9.8 | 12.8 | 23.2 | 38.5 | |
| Max feeding size(mm) | Medium Coarse Extra coarse | 200 250 | 250 330 | 280 380 | 380 500 |
►Capacity of middle crushing
| DP-100S CAPACITY (t/h) | ||||||||||||
Discharging Stroke (mm) | 20 | 25 | 30 | 35 | 40 | 45 | ||||||
| 16 | 80-90 | 105-115 | 120-130 | 135-145 | 145-165 | 155-175 | ||||||
| 20 | 120-130 | 145-155 | 160-180 | 170-200 | 185-215 | |||||||
| 25 | 185-195 | 200-220 | 210-230 | |||||||||
| DP-160S (t/h) | ||||||||||||
Discharging Stroke(mm) | 20 | 25 | 30 | 35 | 40 | 45 | 50 | |||||
| 18 | 110-140 | 140-170 | 160-190 | 180-210 | 200-230 | 230-260 | ||||||
| 25 | 170-220 | 190-240 | 210-260 | 230-280 | ||||||||
| 32 | 230-280 | 270-320 | 280-350 | |||||||||
| DP-250S (t/h) | |||||||
Discharging Stroke(mm) | 20 | 25 | 30 | 35 | 40 | 45 | 50 |
| 18 | 170-190 | 170-210 | 190-230 | 210-255 | 235-275 | 255-295 | |
| 25 | 220-270 | 255-315 | 290-345 | 320-350 | 330-350 | ||
| 32 | 360-400 | 380-420 | 400-420 | ||||
| 40 | 450-500 | 480-530 | |||||
| DP-300S (t/h) | ||||||||
Discharging Stroke(mm) | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 |
| 18 | 300-350 | 325-375 | 375-425 | 400-450 | 425-475 | 450-500 | 500-550 | 550-600 |
| 25 | 500-550 | 550-600 | 600-650 | 650-700 | 700-750 | 750-800 | ||
| 32 | 650-700 | 700-750 | 750-800 | 825-875 | 900-950 | 950-1000 | ||
► Capacity of fine crushing
| DP-100 CAPACITY (t/h) | |||||||
Discharging Stroke(mm) | 7 | 10 | 13 | 16 | 19 | 22 | 25 |
| 16 | 35-45 | 45-55 | 55-65 | 65-75 | 75-85 | 80-90 | 85-95 |
| 20 | 45-50 | 50-60 | 60-70 | 70-85 | 90-100 | 100-110 | |
| 25 | 55-65 | 65-75 | 75-90 | 100-115 | |||
| DP-160 CAPACITY (t/h) | |||||||
Discharging Stroke(mm) | 8 | 10 | 15 | 20 | 25 | 30 | 33 |
| 18 | 60-70 | 70-90 | 80-105 | 100-125 | 135-150 | 160-175 | 170-185 |
| 25 | 90-110 | 110-130 | 130-155 | 160-180 | 185-210 | ||
| 32 | 140-160 | 170-190 | 190-200 | ||||
| 40 | 200-220 | 200-240 | |||||
| DP-250 CAPACITY (t/h) | |||||||||
Discharging Stroke(mm) | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 |
| 25 | 100-120 | 120-140 | 140-160 | 160-180 | 180-200 | 200-220 | 220-245 | 245-265 | 265-290 |
| 32 | 100-130 | 130-160 | 170-200 | 195-225 | 200-250 | 250-280 | 275-305 | 305-335 | |
| 40 | 160-190 | 215-245 | 245-275 | 280-310 | 315-345 | 335-365 | |||
| DP-300 (t/h) | |||||||||
Discharging Stroke(mm) | 8 | 12 | 16 | 20 | 24 | 30 | 35 | 40 | 45 |
| 25 | 150-170 | 165-185 | 190-210 | 230-250 | 250-270 | 280-300 | 320-340 | 340-370 | 370-390 |
| 32 | 200-220 | 230-250 | 270-290 | 300-330 | 370-390 | 420-430 | 470-490 | ||
| 40 | 230-250 | 260-280 | 320-350 | 375-405 | 420-450 | 470-500 | |||
Q: Are you a mining machinery manufacturer?
A: Yes, we are an OEM manufacturer of equipment for processing
stones, we warmly welcome clients to visit our factory at any time.
Q: If I want to set up a complete quarry, can you help us to build
it?
A: Yes, we can not only supply crushers but also provide EPCM
services as well as Turn-key projects for our customers. We have a
professional technical team.
Q: If I want a suitable proposal for a quarry plant, what kind of
information should I provide to your company?
A: Below information is kindly needed.
1. What is the raw material? limestone, granite, basalt, or other
similar stones?
2. How much capacity do you prefer to get? 40-60TPH? 100-150TPH or
250-300TPH?
3. What's the size of your stone before being crushed? How many
inches or mm?
4. What are your requirements for the final product size? How many
inches or mm? 0-10-20-30mm? 0-5-12-19-25mm? Or others?
5. Which type do you need? Stationary type or Mobile type?
Q: How long is the warranty of your machine? Does your company
supply the spare parts?
A: The warranty period is one year. we will supply the spare parts
for you at any time.
Q: How about the installation?
A: If customers request, skilled general technician(s) to supervise
the assembly, installation, commissioning, and train the local
operator will be supplied after the seller confirms the preparation
for installation is ready in the buyer's site. Buyers should take
the charges for technicians and pay them salaries.
Q: What is the payment method?
A: T/T or L/C.
