Hammer Crusher/Stone Crusher/Sand maker/Quarry Crusher
Hammer crusher
PC series of hammer crusher is widely used in metallurgy, mine,
chemical, cement, coal, construction, sand making, refractory
materials and ceramic industry. It is used in secondary or tertiary
crushing, it is mainly suitable for crushing ores with compressive
strength not exceeding 320MPa.
Hammer crusher is a crusher that directly crush those maximum
particles size of 600-1800 mm material to 25 or less than 25 mm.
Hammer crusher is suitable for crushing medium hard materials such
as limestone, cinder, coke and coal in cement, chemical, electric
power, metallurgy and other industrial sectors.
Hammer crusher is mainly composed of casing, rotor, bearing iron
and grate, etc. The casing is divided into two parts. The steel
plate is welded after cutting. The other parts are connected with
bolts as a whole. High manganese steel lining plate is mounted
inside the casing, which can be replaced after wear. Hammer crusher
spindle is installed with an array of regular distribution of
hammer, with the rotary table and hammer shaft to form a rotor.
Product Application
Working Principle of stone hammer crusher:
The main wroking part of hammer crusher is rotor with hammer, the
rotors consist of main shaft, disk, pin shaft and hammers.The motor
drives the rotor to rotate quickly in the crushing cavity. Raw
materials enter the crusher through the feed opening and are
stricken, impacted, cut and ground by high-speed hammer. There is a
screening palte under the rotor, so that materials with size
smaller than the screen mesh will be screened out and others are
left to be further hammered and ground until they reach the
standard size. The size of the final product can be adjusted by
changing the screening plate. The gap between the rotors and the
screening plate can also be adjusted according to different
requirements.
Hammer crusher is a crusher which can directly crush the materials
with the big particle size to very fine particle. Hammer crusher is
suitable for crushing medium hardness materials in cement, chemical
industry, electric power, metallurgy and other industrial sectors,
such as limestone, slag, coke, coal and other materials in the
crushing and fine crushing operations.
Product Parameters
| Model | Rotor speed
(r/min) | Feeding size
(mm) | Discharging size
(mm) | Capacity
(t/h) | Power
(Kw) | Weight
(t) |
|
| PC400×300 | 1200 | ≤80 | ≤10 | 3-10 | 11 | 0.7 |
| PC600×400 | 1000 | ≤110 | ≤15 | 10-15 | 22 | 1.5 |
| PC800×600 | 980 | ≤120 | ≤15 | 20-25 | 55 | 3.7 |
| PC1000×800 | 980 | ≤200 | ≤45 | 34-54 | 110 | 6.9 |
| PC1000×1000 | 1000 | ≤200 | ≤15 | 40-60 | 132 | 8.5 |
| PC1200×1000 | 745 | ≤200 | ≤25 | 75-150 | 160 | 12.5 |
| PC1200×1200 | 745 | ≤200 | ≤20 | 80-160 | 185 | 14.3 |
| PC1400×1400 | 750 | ≤250 | ≤20 | 120-170 | 280 | 17.2 |
| PC1600×1600 | 500 | ≤350 | ≤20 | 220-290 | 500 | 32.4 |
| PCH600×400 | 970 | ≤200 | ≤30 | 22-33 | 15 | 1.7 |
| PCH600×600 | 980 | ≤200 | ≤30 | 30-60 | 30 | 2.4 |
| PCH800×800 | 825 | ≤300 | ≤30 | 75-105 | 45 | 4.8 |
| PCH1000×1000 | 740 | ≤300 | ≤30 | 90-150 | 90 | 7.5 |
Product Parameters
