Low Intensity Double Light Steady Burning Aviation Obstruction
Below 45m
This Low-intensity Double light is a steady burning aviation
obstruction light designed for marking top of obstacle that do not
exceed 45 meters in height. Main-standby mode ensure the obstacle
is always marked even one light fail.
Compliance
ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low
Intensity Type A / B Obstruction Light
FAA L-810
Features
Electrical
LED as light source saving power consumption and maintenance, 95%
less power than equivalent incandescent light
Power supply available in DC(12-48VDC) or AC(110-240VAC)
Physical
Bird deterrent spike on top
UV & vibrations protected polycarbonate lens for converging
light
Powder coated bright yellow color base make better visibility and
UV protection
Base material is die casting aluminum which has strong corrosion
resistance, Shock and Vibrations protection
3/4 or 1 inch thread hole make pole installation easy
System design
Built-in photocell for day/night operation(dusk to dawn operation)
Steady/Flashing(20flashes per minute) DIP switch on PCB
Surge and lightning protection
Main-standby mode, when the main light fail, the standby light
automatically switch on to ensure the obstacle is always clearly
marked.
DIP switches on PCB let the user to select the light working mode
Optional
Alarm contact for remote monitoring
Infrared LED for pilot using NVG
GSM cellphone monitoring
RS485 communication part for monitoring
Application
AH-LI-D low-intensity light could be used alone on the top of the
High-rise Building, High Chimney, marking towers (Telecom, GSM,
Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when
the height is lower than 45m.
When obstacle object is higher than 45m, AH-LI/D can be used with
Medium-intensity or high-intensity obstruction light to indicate
hazardous obstructions with a steady red safety light.
