Home Companies Liyuan Technology (Guangzhou) Co., LTD

Aluminum Alloy SS316 Air Operated Diaphragm Pump 125PSI 1 Inch

Active Member

Contact Us

[China]

Address: No.717B, 2th Building,Tian An Cyber Park, No.1 Jian Ping Road, Guicheng, Nanhai

Contact name:Christina

Liyuan Technology (Guangzhou) Co., LTD

Aluminum Alloy SS316 Air Operated Diaphragm Pump 125PSI 1 Inch

Country/Region	china
Categories	Pumps

Product Details

1 Inch Aluminum Alloy SS316 Air Operated Diaphragm Pump

Product Parameter:

GT20 Metal Pump Specification	Wetted Part Material Aluminum alloy: 9 KG (ATEX Option) SS316: 17KG (ATEX Option)
Max. Flow Rate	Rubber diaphragm: 172 LFM TP diaphragm: 171 LFM Teflon FTFE: 168 LFM
Diaphragm Material	Teflon, Santoprene, EFDM, NBR, Viton, Neoprene
Max. Suction Lift	Rubber: Dry 5.2 M / Wet 9.0 M Thermoplastic compound TP : Dry 7.5 M / Wet 9.0 M Teflon FTFE: Dry 5.5 M / Wet 9.1 M
Parameter	Liquid in let: 1" Liquid outlet: 1" Air inlet: 1/4” Max. inlet pressure : 8.62 BAR (125 PSI) Max. size solids: 3.2 mm (1/8’’)

Working Principle:

This series of diaphragm pump is a positive displacement pump that uses a combination of the reciprocating action of a diaphragm together with suitable valves on either side of the diaphragm in order to pump liquid. There are two diaphragms connected with each other by a shaft working in a separate chamber along with two sets of inlet valve balls and outlet valve balls.

The diaphragm will separates the pumping action (liquid chamber) and air supply action (air chamber) individually. The reciprocating action will be powered by the air valve function which is shifting the air into either side of the air chamber systematically.

Thus, the pumping action is generated when air pushes into separate chamber acting on the diaphragm one after another. The pair of inlet and outlet valves will complete the pumping action with designated path direction.

NOTE: The diaphragm's lifespan will be extended because of the air acting evenly onto the diaphragm instead of high mechanical stress on shaft connector area if it depends on the shaft to create the reciprocating action.