HEBEI SOOME PACKAGING MACHINERY CO.,LTD |
Verified Suppliers
|
|
Clapboard Partition Phase Adjust Handle Auto Corrugated Slotter Machine CE
Summarize
This auto corrugated board slotter is used in slotting and cutting corner of paperboard.
Features
1. Choose the corrugated paperboard which you want to process,
adjust the side feeding baffle .Adjustment method : loose the
screws in circle of below picture, move the two side feeding
baffles right or left , adjust the distance between two side
baffles according to the length of paperboard , after finishing
adjustment , tight the screw and fix the baffles .
2. When the length of paperboard is big , can move the front
feeding baffle right or left. Adjustment method : loose the screws
in circle of below picture, move the two front feeding baffles ,
adjust the front feeding baffles to the suitable positions
according to the length of paperboard , after finishing adjustment
, tight the screw and fix the baffles .
3. Adjust the back feeding baffle, adjustment method : loose the
screws in circle of below picture , move the two back feeding
baffles forwards or backwards , adjust the suitable positions
according to the width of paperboard , after finishing adjustment ,
tight the screw and fix the baffles .
4. Adjust the suction range of feeding table : first put one piece
of paperboard on the feeding table , rotate the belt wheel which is
with yellow circle in Picture Left , check the walking range of the
pushing plate . Ensure that the distance between the pushing plate
and the paperboard is 2mm when the pushing plate move the extreme
edge of machine , then it can push the paperboard and make it feed
forwards. If need to adjust the position of pushing plate , loose
the screws which are circled in Picture Right , find the suitable
position , and fix the pushing plate .
Functions and Characteristics
1. The auto corrugated board slotter machine working interval
adjustment adopts fast spanner-free adjustment and the
electromagnetic brake system with the worm wheel and worm setting
operates fastly and conveniently.
2. The mainframe chooses control by conversion frequency ,with more
stable and energy-saving start-up and running.
3. Option for the vacuum adsorption, kick feeding or leading edge
feeding.
Technical Parameters
Model | 1000type |
Machine Max Speed | 120piece/min |
Max Feeding Size(L*W) | 1000*300(mm) |
Min Feeder Size(L*W) | 100*75(mm) |
Min Slotting Distance | 45mm |
Slotting Amount | 9 groups slotting knives |
Slotting Width | (Choose one according to the thickness of paperboard) |
Dimension(L*W*H) | 1500*1450*1300(mm) |