Fast Change Roller Type Single Facer Corrugated Machine

2 Ply Paperboard Production Line Cassette Machine Fast Change Roller Type Single Facer

Machine description:

1. Using negative pressure type design helps the medium paper to press evenly and closer to the surface of corrugating roll to have perfect forming. And also get even gluing on the flute tip to have perfect laminating of the single facer.

2. Quick change rollers in 15 minutes,while replacing the corrugated roller,the whole complete set of additional rollers with cassette is delivered into the machine by the carriage and matched with the hydraulic motor to be fixed on the base of the machine by hydraulic system. Quickly and easily complete the corrugated roller replacement.

3. The corrugating rollers,pressure roller,and glue roller are adopted with high stability of the airbag control system,also with pneumatic control buffer effect.

4. Adopt glue width motorized dividing to match the paper width.Idle running motor for glue applicator roll to avoid glue dry.Adjustment for gap between glue roller and doctor roller by electric .Digital read out for the gap between glue roller and doctor roller.

5. The moveable type glue unit is convenient to clean and maintain.

6. Easy operation control system.Touch screen with colorful drawing displays operation state,easy and simple to handle.

7. Built-in pre-conditioner with proportional spraying device for tyhe medium moisture and temperature adjustment.

Structure and Features:

1. Quick change rolls in 15mins, while replacing the corrugated rolls, the whole complete set of additional rolls with cassette is delivered into the machine by the carriage and matched the hydraulic motor to be fixed on the base of the machine by hydraulic system. Quickly and easily complete the corrugated roller replacement.

2. Corrugated roller are made of 48CrMo high quality alloy steel, with heated treatment. The surface is well treated by grind and plated tungsten carbide.

3. The corrugating rolls, pressure roll and glue roll are adopted with high stability of the airbag control system, also with pneumatic control buffer effect.

4. Adopt glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for gap between glue roll and doctor roll.

5. The moveable type glue unit is convenient to clean and maintain.

6. Easy operation control system. Touch screen with colorful drawing display operation state, easy and simple to handle.

7. Bulit-in pre-conditioner with production spraying device for the medium moisture and temperature adjustment.

8. Bearing for corrugated rollers, and pressure roller adopt high-temperature lubricate grease to keep running smoothly and durably.

Technical parameters:

1. Working width:1800mm

2. Operation side:left or right(depends on customer’s factory)

3. Design speed:200m/min

4. Temperature Control:160—200℃

5. Gas:0.4—0.9Mpa

6. Steam pressure:0.8—1.3Mpa

7. Corrugated type(UV or UVV)

Roller diameter:

1. Upper corrugated roller: φ360mm

2. Pressure roller:φ385m

3. Gluing roller:φ268mm

4. Paste roller:φ155mm

5. Pre-heater roller:φ400mm

Motor parameter:

1. Main frequency motor:30KW Rated voltage:380V 50Hz Continuous(S1)working standard

2. Suction motor:15KW Rated voltage:380V 50Hz Continuous(S1)working standard

Technical index: