HEBEI SOOME PACKAGING MACHINERY CO.,LTD |
Verified Suppliers
|
|
Industrial Die Cutting And Creasing Machine For Corrugated
Cardboard Carton Box
Summarize
Due to the continuous rotation of the drum when the rotary die
cutting machine works, the production efficiency is the highest
among all kinds of die cutting machines. But the die cutting plate
needs to be curved to form curved surface. The plate making is
rather troublesome, and the cost is relatively high. It is
technically difficult. Therefore, the circular die cutting machine
is often used in mass production. The die cutting method of
circular die cutting machine is generally divided into two types:
hard cutting and soft cutting. Hard cutting refers to the rigid
contact between the cutter and the pressure roller when the die is
cut, so the die cutter is easier to wear. The soft cutting method
is to cover a layer of engineering plastic on the surface of the
pressure drum. When die cutting, the cutting tool can have a
certain cut in. This can protect the cutter and guarantee the
complete cut off, but the plastic layer needs to be replaced
regularly.
Feature
1. Servo control leadedge feeder make the crooked paperboard level
off.
2. MainTransmission gears are made of high quality alloy steel
(20Cr) grinded under high temperature with hardness > HRC58-62.
3. Spraying circulation is adopted to lubricate the gears, reduce
noise and prolong the service life.
4. Anvil roller and mould roller adopts high-grade steel with fine
reground and chrome plated surface.
5. Balance correction enhances running stabilit.
6. Mould roller and anvil roller can be apart / released by the air
cylinder eccentric mechanism during non-working condition in order
to decrease the load of the machine, and to prolong the life of the
cutting mould and urethane rubber.
7. Pneumatic lifting device working synchronous with the feeding
system (During the feeding operation the mould roller pressed and
when the feeding stops the mould roller released to ensure the
correct die-cutting of every paperboard).
8. Mechanical drive anvil roller transverse moves within 30mm, and
installed with radial differential device to spread wear evenly
(every cutting at different position) and to improve the life of
anvil roller.
9. No matter how vary the diameter of anvil roller, unique speed
difference compensation device servo motor control , makes the
anvil roller slide together with mould roller.
10. Imported urethane (rubber) cover and its correction device to
prolong the working life – 3 to 4 corrections, 1 – 1.5mm each
correction.
11.Planetary gear phasing structure, 360 degree motorized
adjustment (run, brake, forward & backward).
Model | Max feeding size (mm) | Min feeding size (mm) | Thickness of feeding paper (mm) | Power of main motor (kw) |
SMYY-MQ-1216 | 1600×1200 | 300×500 | 1-8mm (3-5 layer) | 4.0 |
SMYY-MQ-1218 | 1800×1200 | 300×600 | 1-8mm (3-5 layer) | 5.5 |
SMYY-MQ-1220 | 2000×1200 | 400×600 | 1-10mm (3-7 layer) | 7.5 |
SMYY-MQ-1222 | 2200×1200 | 400×600 | 1-10mm (3-7 layer) | 7.5 |
SMYY-MQ-1224 | 2400×1200 | 400×700 | 1-10mm (3-7 layer) |
7.5 |