Auto Feeder 4 Color Corrugated Box Printing Machine Slotter Stacker

【1】 electric control machine from the alarm bell, continuous ringing warning, to ensure the safety of workers.

【2】 drive shaft with friction clutch, to avoid misuse and damage to the machine.

【3】 pneumatic interlock device.

【4】 The host motor starts the protection device. (The machine is not locked, the host can not start running)

2 . leading edge roller type feeding system

【1】 suction auxiliary feeding paper fan 7.5KW, according to the different bending conditions of cardboard, air volume adjustment,

To ensure smooth paper supply. Use the brush to remove the cardboard surface

Dust, scraps of paper and other debris, improve the printing quality.

[2] slotted with a chain control switch, control emergency stop paper.

【3】 The paper lift and down adopt the air cylinder,the action quickly, effort.

[4] the use of Shandong "Komori" front edge roller feed system, simple operation, high precision. The amount of extension can be adjusted, raw

Strong adaptability. Speed transmission more stable, suitable for warping, thin cardboard transmission, the effect is obvious.

【5】 side baffle, rear box position by the screw electric adjustment; front baffle upper and lower gap position manually synchronized adjustment.

【6】 skip feeding device (according to the need to choose continued or sheet feeding).

3. Feed roller

【1】up roller use the soft rubber shaft ,so when feed the board ensure the not borken the board

【2】 The lower feed roller with embossing roller diameter ¢ 155 mm, seamless steel pipe, embossed hard chrome plating.

【3】 feeding roller cross slider-type dial dial manually adjust the adjustment range of 0 ~ 12 mm. Adjustment does not affect the gear gap, to ensure transmission accuracy.

【4】 hand-type quick clearance fine-tuning self-locking device.

Printing department (4 group ) with doctor blades

Auto rise the ink plate ,the inker turning to prevent ink dried. Adopt electrically separation ,pneumatic locking Ink supplied by pneumatic diaphragm pump

Main transmission gear made by 45# steel ,it adopts helical gear driving and processed by high frequency quenching.Auto sprinkle lubricating system ensures the machine precise and use life

All the roller must be chrome –plating in order to increase the hardness

Slotting creasing unit

1. The device self-locking function prepress the quick adjusting mechanism, which guarantees the long-term precision between the disc and the shaft, and the rupture of the paper is slowed down when the line is pressed.

2. The roller with the latest design precompression is adopted to protect the paperboard from damage.

3. Equipped with the button left and right to synchronize the electric axial movement of the motor, make the upper and lower creasing line move together, the upper and lower slotting knife, make the synchronous adjustment, and electrical adjusting box height function.

4. With the digital display function, the planetary gear type phase adjustment mechanism is used to carry out the electric adjustment of the slotting phase and the box height.

5. Select the high quality alloy steel slotting knife , and the blade thickness is 7mm.

6. It is equipped with lubricating wear-resistant guide block to ensure the correct displacement and increase of durability of the creasing wheel and slotting cutter wheel.

7. The operation department of the slotting panel is equipped with paperboard feeding on/off and main motor on/off . which has the function of multi-point adjustment.

8. Operation control

9. electric control switch to adjust the axial direction, longitudinal and box height of each blade.

10. Paper feeding clearance adjust the self-locking device with manual adjustment and quickly.

11. the emergency stop device is installed to ensure safety.

12. High adjustment of slotting phase/box:

13. with 360 ° slotting phase positive/negative adjustment, fast and high precision.

14. the phase return zero device ensures the consistency of slotting. position.

15. the box height adjustment adopts the internal tooth structure electric adjustment to avoid the gear oil pollution board.

16. Slotting phase and box height adjustment

17. high quality creasing wheel axial, diameter of 110mm, surface plating hard chrome.

18. adjust the position axis of the pressure line and slotting blade axial synchronized moving.

19. Split paper/slotting tool holder.

20. the thickness of the slotting knife is 7mm, and the high quality alloy steel heat treatment gear shaping machine is made by professional manufacturer to ensure the quality.

21. the diameter of axle for Φ 159 mm.Surface grinding and chrome plating, smooth movement.

22. slotting, paper cutter holder, creasing line wheel and pre creasing wheel position axis are adjusted automatically.

23. the center slotting knife can be moved, and it is suitable for producing large and double boxes.

24. adopt unique slotting waste removal device to reduce cost and long life.

Cutting device (die cutter 1 unit )OPTION

1,rubber cushion imported

2,Double-worm abrasire belt cushion correction facility

3,Cushion axial floating automatically to improve the utilization rate of cushion. The range of floating is 0-20mm (from middle to left or right )

4,Speed difference self-compensating function 6,Die cutting phase is adjusted by electric

Stacking& vibration Department

• l1)splicing arm manually, then the paper highly arbitrary choice.
• l2)splicing arm individually adjust the belt tension.
• l3)paper received a strong platform lift chain drive.
• l4)platform for the collection of paper piled high with cardboard automatically adjusts the slope, the lift motor attached to the electrical braking function, the platform can be guaranteed a fixed location.
• 5)When make action tray pressure in cardboard stacked to a predetermined height, then automatically cardboard prop out, hold the cardboard.
• l6)cardboard stack height 1850mm.
• l7)conveyor drive motor 2.2kw (speed control) × 1 units.
• l8)elevator motor 3kw × 1 units.
• l9)splicing arm cylinder ф80 × 300 (attached three five-way solenoid valve).
• l10)The system set length of 5.5 meters, tap the paper part, transmission part delivery section, connected with friction belt transmission cardboard, paper receiving portion of the cylinder lift, separate tensioner pulley.
• main part brand

Spare part for free