3 5 Colours Corrugated Box Printing Machine With Slotter Die Cutter

3 5 Colours Corrugated Box Printing Machine With Slotter Die Cutter

Corrugated Box Printing Machine Feeder Department

1. Machine clutch

1) The Corrugated Box Printing Machine electric control machine clutch is equipped with an alarm bell, and the bell continues to warn during travel to ensure the safety of operators.

2) The transmission shaft is equipped with a safety clutch to avoid damage to the machine due to wrong actions (when the machine is not locked, the host cannot start running).

3), pneumatic interlocking device.

4), the main engine motor starts the protection device.

2. Adsorption type leading edge feeding system

1) The leading edge feeding mechanism can greatly reduce the jamming phenomenon during the feeding process of the cardboard.

2) The suction fan assists paper feeding to ensure the smooth feeding of the curved cardboard, and the air volume can be adjusted in each section according to the size of the cardboard to maximize the vacuum adsorption force of the cardboard and make the paper feeding more accurate.

3) The gap between the front baffle and the rear baffle is adjusted manually, and the gap between the left and right baffles is adjusted electrically.

4) The feeding roller is made of polyurethane material, which has high friction and long durability.

5), suitable for three-layer, five-layer, seven-layer corrugated cardboard, including E-type corrugated cardboard

6), paper feed counter, set and display the production quantity.

3. Dust removal device

1) Equipped with a dust removal mechanism (dusting and dust removal brush), which can effectively remove impurities on the surface of the cardboard and improve the printing quality.

4. Paper feed roller

1), the outer diameter is Ф240mm.

2), seamless steel pipe, wrapped with wear-resistant rubber, and do balance correction.

3) The lower feeding roller is chrome-plated.

4) The upper and lower adjustment range of the feeding roller is 0-12mm.

5. Operation control switch (PLC computer control)

1) The control panel is equipped with a 10-inch touch screen, which can control the feeding part, printing part, slotting part and die-cutting part, which is easy to operate.

6. Automatic zero reset device

1) The feeding part, printing part, slotting part and die-cutting part are automatically reset to zero by electric type.

2) Generally, the carton uses an automatic zeroing device, which can be adjusted to the correct position after two trial prints, reducing the waste of cardboard.

Corrugated Box Printing Machine Printing Department

1. Printing roller (plate roller)

[1] The outer diameter is ￠396mm (including the outer diameter of the plate is ￠408mm).

[2] The surface of high-quality steel is ground, axial reference scale, and hard chrome plated.

[3] Do balance correction, stable operation..

[4] The printing roller is manually moved horizontally in the axial direction, and the maximum movement is 10mm.

2. Printing press roller

[1] The outer diameter is ￠137mm.

[2] The surface of high-quality seamless steel pipe is ground, dynamic balance correction, stable operation, hard chrome plating.

3. Paper feeding upper and lower rollers

[1] Upper roller: seamless steel pipe with an outer diameter of ￠86mm, with three paper feeding rings.

[2] Lower roller: seamless steel pipe with an outer diameter of ￠120mm, the surface is ground and plated with hard steel.

4. steel anilox roller rubber roller

[1] The outer diameter of the anilox roller is ￠176mm. (The number of meshes is selected according to customers)

[2] The surface of the steel pipe is ground, reticulated and hard chrome plated.

[3] Do balance correction, stable operation.

[6] The anilox roller is equipped with a wedge-type overrunning clutch, which is convenient and quick to distribute and wash ink.

[7] The outer diameter of the rubber roller is ￠153.6mm.

[8] The surface of the steel pipe is wrapped with wear-resistant rubber, and the balance is corrected.

[9] Rubber medium-high special grinding, good ink transfer effect. Quick gap fine adjustment self-locking device to ensure uniform ink application. The uniform ink distribution system has a good ink transfer effect and prolongs the life of the rubber roller.

5. Phase adjustment mechanism

[1] Planetary gear structure.

[2] The printing phase adopts electric digital 360° adjustment.

6. Ink cycle

[1] Pneumatic diaphragm pump, stable ink supply, simple operation and maintenance.

[2] Ink filter screen to filter impurities.

Corrugated Box Printing Machine Slotter Part(Synchronous Transversal)

1. The self-locking function of the device is equipped with a pre-pressing and quick-adjusting mechanism, which ensures the long-term accuracy between the disc and the shaft, and slows down the breaking of the paper when the line is pressed.

2. The crimping roller adopts the newly designed pre-pressing type crimping roller to protect the plasticity of the cardboard from damage.

3. There is a button for synchronous left and right combined transportation and electric axial movement, so that the upper and lower pressure rollers, the upper and lower slotting knives can be adjusted synchronously, and the height of the box can be adjusted electrically.