CHINA YIKE GROUP CO.,LTD |
|
Electric Heating 1600MM 280S Single Facer Use For Corrugated
Cardboard Production Line
I Single Facer Structure
The single-facer machine consists of a roll holder and a
single-face corrugating machine. The corrugated medium is first
heated, then the corrugated roll is used to make the desired
flute type, and finally the rubber is coated at the peak
(starch adhesive) with one side. Corrugated paper is bonded to form
a single-faced corrugated board. The heating method of the core
paper is steam heating, electric heating and oil heating.
Single-face machining flute can be customized.
II The Main Components
The main components of the single-facer machine are: base
paper support, corrugating roller, pressure roller, preheating
roller, glue application device, pneumatic device, paper guide
sheet and vacuum adsorption device.
III Single Facer Heating Method
IV YX-280S Single Facer, Electric Heating
V Parameters
Model | SF-280S |
Working width | 1600 mm |
Heating way | Electric heating |
Operate direction | Left or right according to customer’s factory |
Steam heating way speed | 70-80m/min |
Electric heating way speed | 30-50m/min |
Temperature range | 160—200℃ |
Steam pressure | 0.8—1.3Mpa |
Air source | 0.4—0.8Mpa |
Flute type | A,B,C,D,E,F,UV UVV |
VI. Single Facer Machine Safety Operation
Procedures
VII. 100% Real Photo