1/2 Inch CW617N CW614N Material Brass Slip Coupling Push Fit Fitting

1/2 Inch Brass Slip Coupling / Push Fit Fitting For Copper

Introduction

1. For PEX pipe,

2. Material is CW617N&CW614N,

3. AISI304 S/S sleeve,

4. Size DN12,16,18,20,25,1/2",3/4",1"1-1/4"

Specification:

Installation

Select the correct size fitting and pipe for the job. Check that fittings
and pipe are clean, in good condition and are free from damage and
foreign objects.Cut the pipe so that the ends are square.Ensure that
there are no burrs or damage to the cut end.Once the pipe end is cut
square and clean,use a permanent marker to mark the insert depth
on the outside of the pipe.This mark is used to ensure that the joint
is assembled correctly.To assemble correctly,the pipe needs to be
pushed into the fitting untill it meets the tube stop.Follow these three
steps to insert the pipe into the fitting.
1.lnsert the pipe through the release collar against the grab ring.
2.Push the pipe firmly with a slight twisting action until it reaches
the tube stop.
3.To ensure that the pipe is correctly inserted, check that the depth
mark is within 0.005 in (0.13 mm) of the end of the release collar.

Disconnection of the joint can only occur by using the PUSHLOCK
removal tool.By applying pressure to the release collar with the re-
moval tool, the grab ring teeth are splayed.This action releases the
pipe, allowing it to be removed from the fitting.
1.Place the PUSHLOCK removal tool around the pipe with the non-
branded face against the release collar.The end with the size dis-
played on the removal tool should be positioned around the pipe and
the other end around the neck of the fitting.
2.Push the removal tool against the release collar and pull the pipe
with a twisting action to release the pipe.
3.Check the fitting and pipe end for damage.The fitting and pipe
should be free of damage, foreign objects and marks on the outside
diameter. If the pipe is damaged or marked, then cut and use a new
section of pipe.

about us 

Originally founed in1983,TaiZhou JinQuan Copper Inc. is one of the leading
manufacturer of lead free plumbing valves&fittings, mainly serving plumbing
wholesalers,distributors and retailers.
We are currently supplying lead free PEX fittings&Valves,push-fit fittings&Valves,
Various water supply stops and water connectors etc.All products are made of
lead-free with DZR functional brass,and have been certified and listed by IAPMO.
Our goal is to help our customers to increase their profitability and gain more market
share by taking advantage of our extremely competitive price and quality.

FAQ

Q1:How many coutries you already exported ?
A1:Exported to mainly in Asian and European countries mainly from Russia,Korea etc.

Q2:How can I get some samples?
A2:Small samples in store and can provide the samples for free. Customized samples will take about 5-7days.

Q3:What is the MOQ?
A3:Stainless steel coils 2 tons

Q4:What is the delivery ?
A4:Sample order’s delivery time is 3-5 days. Container orders are about 7-15 days.

Q5:why you choose us ?

A5: Excellent quality, low price, faithful service is our company foundation. Total customers satisfaction is our consistent pursuit.

Q6:How about quality of your products ?

A6: The company has always been in spirit of “credit first, quality utmost”.