|
[China]
Trade Verify
Address: #526, Block E, Building 5, Software Industry Base, Nanshan District, Shenzhen , China, 518061
Contact name:Sandra
Shenzhen Coolmay Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
4.3" TFT Integrated HMI PLC ARM9 Core 400MHz GX Developer8.86 Software
Advantage:
◆ Powerful, compatible with FX3G/FX3U/FX3S PLC, high processing speed.
◆ Special encryption, prevent illegal reading thoroughly. 8-bit encryption, 12345678 as password can thoroughly prevent reading of ladder logic program.
◆ Default With 1 HMI Downloading port, 2 PLC programming ports: one MiniB USB port with faster downloading speed; one Rs232 programming port with 8 mouse hole sockets, and 1 USB port.
◆ High speed pulse, regular as 8 channels Y0-Y3 in 100KHz,Y4-Y7 in 10KHz
Note: High speed counter+High speed pulse should be less 480KHz.
◆ EX3G-43H is up to 12DI/12DO,DO is optional to choose MR(max:5A)/MT(max:2A).
◆ Flexible, can be customized accordingly.
◆ 32K steps program capacity, 32k registers of hold on when power off, support interrupt,linear&circular interpolation,PID and self-tuning,high powerful.
Parameter:
Display | Dimension | 134*102*32mm |
Resolution | 480*272 pixels | |
Type | 4.3” TFT | |
Features | Support interrupt, linear arc interpolation, PID auto-tuning. 32K program capacity, 32K retentive register | |
Memory | RAM | 64MB |
ROM | 128MB | |
CPU | ARM9 core 400MHz | |
I/O | DI/DO | 12DI/12DO |
Input: Passive NPN, public terminal isolated Transistor output: Low level NPN, COM connect to negative; Relay output: Normally open dry contact | ||
DO type and load | Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point COM; MR: 2A/point, 5A/12 point COM. | |
Analog I/O (optional) | Max 4AI/2AO | |
AI type (optional) | Type E/E_/K/K_/S/S_/T/T_/J/J_ thermocouple/ PT100/ PT1000/ NTC10K/ NTC50K/ NTC100K/ 0~10V/ 0~5V/ 0~20mA/ 4~20mA/ mixed | |
AO type (optional) | 0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed | |
High-speed function | High-speed counting | 6 channels single-phase 60KHz, or 2 channels AB (Z) phase 60KHz + 1 channel AB phase 10KHz |
High-speed pulse | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz High-speed counting + high-speed pulse < 480KHz | |
Connection | HMI | 1 HMI download port |
1 RS232 port | ||
PLC | 1 Mini type B USB port, 1 RS232 port (Program port,also can be used as COM port) | |
1 RS485 or 2 RS485 COM ports (one is changed from the default RS232 port) | ||
Software | HMI | CoolMay HMI programming software |
PLC | Compatible with GX Developer8.86 and GX WORKS 2 |
PLC Programming notice
The PLC is compatible with GX 8.86/Works 2 and below. If you use other versions of the software, incompatibility may occur.
When the PLC program is downloaded, there is a prompt error: Cannot specify the com port,
GX 8.86 software: Online - Transfer settings change com port;
Works 2: All targets - Change the com port in all connected targets;
If communication error occurs, cable is abnormal If prompted, remove it by powering off, detecting the cable, detecting whether the power is normal, or replacing the computer.
In the Works 2 software version, choose the figure : (Note: the label is forbidden)
PID instruction format and parameter description
Instruction format::
Parameter Description:
Operand Type | Content | Data Type | Word software component |
S1. | Save data register number of the target value (SV) | BIN16 bit | D,R |
S2. | Save data register number of the measured value (PV) | BIN16 bit | D,R |
S3. | Save the data register number of the parameter | BIN16 bit | D,R |
D. | Save data register number of the output register (MV) | BIN16 bit | D,R |
