|
[China]
Trade Verify
Address: #526, Block E, Building 5, Software Industry Base, Nanshan District, Shenzhen , China, 518061
Contact name:Sandra
Shenzhen Coolmay Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Industrial Control PLC BD Board Transistor Output 32k Steps Program Capacity
L02 series PLC is Coolmay small and medium-sized programmable control system. In addition to the improvement of execution speed and storage capacity, it also provides a more flexible system expansion architecture in order to meet users' higher-end application requirements. Under such a system architecture, users will not have to split the system into multiple host systems for control due to excessive system points or excessive distance between devices. In this way, the integrity of the system can be preserved, and Allow users to be more efficient in the project development process.
Advantages:
1) Support Mitsubishi programming software
◆L02 series CPU module, the programming software is compatible with GX Developer8.86/GX Works2.
◆Support online editing mode, allowing users to update the program without affecting the system operation while the system is running.
◆Supported programming languages: Ladder Diagram (LD) and Sequential Function Chart (SFC).
2) Multifunctional communication interface
◆L02 series host PLC has two default programming ports, 1 Type-C programming port, the download speed is faster; 1 RS232, which the interface terminal is an 8-hole mouse head female socket.
Note: When using FX3U mode, the download program only supports RS232 download.
◆Provide 2 RS485, support Mitsubishi programming port protocol/modbus RTU protocol/free port protocol/Mitsubishi BD board protocol, easily realize PLC interconnection and communication with external equipment such as HMI and vfd inverters .
◆1 CAN, support CAN2.0A, CAN2.0B, modbus networking and free port protocol, can easily realize multi-channel interconnection.
◆1 high-speed Ethernet interface, supporting Mitsubishi programming port protocol, modbus TCP/UDP protocol, Ethernet/IP protocol.
3) Memory card storage interface
◆The memory card interface provides the following functions:
System backup: user programs, CPU parameters, I/O configuration settings, device settings
System response: user program, CPU parameters, I/O configuration settings, device settings
Parameter storage: device content value
Record storage: system error record, system status record
Parameter:
Programming language | Ladder diagram(LD) / lnstruction list / Sequential function chart(SFC) | |
Program capacity | 32k steps | |
Storage capacity | Date (D) | [D0~D127] 128points General / [D128~D7999] 7872points Retentive / [D8000~D8511]512points Special |
Expansion(R) | [R0~R22999] 23000points Support power-down retention / [R23000~R23999] 1000points Internal use | |
Expansion model | Max limit of 31 units: max 12 analog input/output respectively | |
Max l/O | FX3U mode: 512 points; FX3G mode: 256 points (the sum of input and output points) | |
CPU Digital I/O | 12DI/ 12DO | |
CPU analog I/O | 4AI/4AO | |
AI Type | 2*0-10V, 2*0-20mA(4-20mA) | |
AO Type | 2*0-10V, 2*0-20mA(4-20mA) | |
Timer T | [TO~T199] 200points 100ms General / [ [T250~T255] 6points 100ms
Retentive | |
※The 10ms timer is affected by the scan period. | ||
16-bit counter C | [CO~C15] 16points General | |
32-bit counter C | [C220~C234] 15points Retentive | |
[C235~C245 Single phase single counting][C246~C250 single phase double counting] | ||
[C251~C255 Two-phase double counting] | ||
High-speed pulse | 4-axis 200KHz+4-axis 50KHz (Y0-Y3 each 200KHz; Y4-Y7 each 50KHz, total should not be over 200KHz) | |
High-speed counter | 6 channels 60KHz | |
Do type | LO2M24T: Transistor output, load maximum 500mA, low level NPN, COM connected to negative | |
Default COM | Type-C, RS-232, RS-485*2, Ethernet, CAN | |
Protocol | Programming port Modbus RTU, Modbus TCP, Modbus UDP, freeport protocol, CAN, Ethernet/IP, BD board | |
Data backup function No | Program | Flash ROM |
Retentive area | MRAM has no write limit | |
Calendar(RTC) | Commercially available batteries CR1620(optional) | |
Self-diagnosis | CPU abnormalities, internal memory problems, etc | |
Rated input voltage | 24VDC(土10%) | |
Software | Compatible with GX WORKS 2 | |
Hardware interface:
